Filters
ECAS2CV
1899 products
Showing 289 - 336 of 1899 products
Display
View

Bulkhead, 2cv, before 1969, complete lower section assembled, LEFT HAND DRIVE. SUPER HIGH QUALITY
Part Number: 300728HQ
£106.80
(£89.00 ex. VAT)

Bump stop, droop stop, round, rear, fits on top of chassis to rear of rear axle, Acadiane or AK400, M7 thread length 21mm.
Part Number: AZ4371B
£5.99
(£4.99 ex. VAT)

Bump stop, droop stop, round, top of chassis, FRONT only, M7 thread length 18mm.
Part Number: AZ4371BALT
£7.73
(£6.44 ex. VAT)
Save £1.72

Bump stop, NEW SUPER BONDED QUALITY, rectangular base, beneath front arm on side of chassis. SEE NOTES
Part Number: A1.1554
£7.60
£9.32
Bumper bar, 2cv Charleston, front, dark metallic silver grey. See notes too!
Part Number: 18901CH
£69.00
(£57.50 ex. VAT)

Bumper bar, 2cv, Charleston, 11cm high, dark metallic silver grey, rear.
Part Number: 6130
£67.50
(£56.25 ex. VAT)

Bumper bar, 2cv, front, standard grey beige (gris roues), fits properly, tape not included, See notes too!
Part Number: 18901
£49.00
(£40.83 ex. VAT)

Bumper bar, 2cv, rear, narrow, 8cm high, normal grey beige colour. Read attached description carefully please.
Part Number: AY61590A
£66.00
(£55.00 ex. VAT)

Bumper bar, 2cv, rear, standard, wide, grey beige (gris roues AC140 colour), 11cm high, tape not included.
Part Number: 30650
£51.60
(£43.00 ex. VAT)
Bumper bar, non polished stainless steel, rear, Dyane, supplied without the tape shown. SEE IMPORTANT NOTES.
Part Number: 30800
£130.00
(£108.33 ex. VAT)
Bumper bar, stainless steel, front, Dyane. Supplied without the tape shown. zero stock, out of stock.
Part Number: 30700
£0.00
(£0.00 ex. VAT)

Bumper bracket, Dyane, rear, for narrow 8cm painted bumper.
Part Number: AZ61588
£28.39
(£23.66 ex. VAT)
Bumper bracket, set of 2, 2cv, rear, for 8cm narrow bumper.
Part Number: 5288AP
£39.50
(£32.92 ex. VAT)
Bumper bracket, set of 2, zinc plated, 2cv rear, for 11cm bumper.
Part Number: Z30556P
£36.50
(£30.42 ex. VAT)
Bumper bracket, zinc plated, 2cv rear, for 11cm rear bumper. See notes.
Part Number: Z30556
£20.40
(£17.00 ex. VAT)

Bumper screw bolt, fits through bumper face, M7, wide, STAINLESS steel, pozidriv head, with STAINLESS nut and washer. Per 1
Part Number: 400508
£3.24
(£2.70 ex. VAT)

Bumper trim, 2cv up to 1963, rubber with aluminium strip, pale grey, front left or right.
Part Number: 1720203
£28.44
(£23.70 ex. VAT)

Bumper trim, 2cv up to 1963, rubber with aluminium strip, pale grey, front, middle.
Part Number: 1720204
£28.44
(£23.70 ex. VAT)

Bumper trim, 2cv up to 1963, rubber with aluminium strip, pale grey, rear left or right.
Part Number: 1720207
£27.60
(£23.00 ex. VAT)

Cable clip, fan cover, for points ignition wire and inner wing repeater wire, 2cv.
Part Number: 698696
£0.96
(£0.80 ex. VAT)
Caliper (front brakes) brake bleed nipple valve M8, 9mm spanner size. See notes.
Part Number: 121006
£3.24
(£2.70 ex. VAT)

Caliper centring link tube used between caliper halves on Ami 8, some 2cv, some Dyane
Part Number: 5405104
£3.00
(£2.50 ex. VAT)
Caliper seal repair kit, 2cv etc., (2 kits needed per car) Per caliper kit. Colour may vary.
Part Number: 1200235
£12.60
(£10.50 ex. VAT)
Caliper spacer shim, 2 holes, fits between caliper & gearbox.
Part Number: 5420184
£3.24
(£2.70 ex. VAT)

Cam follower, convex ground, chilled cast iron construction, (standard – not oversize) 2cv etc. per one piece.
Part Number: 00916
£31.18
(£25.98 ex. VAT)
Camshaft 2cv6, Dyane 6, NEW, genuine Citroën original part.
Part Number: 95533239
£495.00
(£412.50 ex. VAT)
Camshaft rear bearing/oil pump housing with rotors 10.5mm up to 1980
Part Number: V01
£95.00
(£79.17 ex. VAT)

Camshaft rear bearing/oil pump housing with rotors 11.2mm 1980 onward.
Part Number: 95559620EB
£128.88
(£107.40 ex. VAT)

Captive nut insert only, fixes hub cap to wheel from behind.
Part Number: 21550
£2.10
(£1.75 ex. VAT)
Car cover, 2cv, 'Stormforce', waterproof, for long term protection, breathable.
Part Number: CCC248
£136.50
(£113.75 ex. VAT)
Car cover, 2cv, basic, good value, soft, breathable, lightweight, weather resistant, fits 2cv perfectly, see description notes.
Part Number: 9851
£36.00
(£30.00 ex. VAT)

Car cover, Acadiane, AK400, AK350, basic, good value, soft, breathable, lightweight, water resistant - NOT waterproof, see description notes.
Part Number: 9481
£36.00
(£30.00 ex. VAT)

Carburettor 2cv (some) 3OPCIS, single barrel, GENUINE NEW SOLEX. (Not for dolly). Check your car carefully!
Part Number: 30PCIS
£348.00
(£290.00 ex. VAT)
Carburettor accelerator throttle return spring 100mm overall length - fits from 26/35 carburettor to engine cowl.
Part Number: 20119
£2.76
(£2.30 ex. VAT)
Carburettor base gasket ARAMID (heat resistant) use each side of insulator block above manifold for Solex 26/35 (most 'Dolly' etc.).
Part Number: 01915A
£2.64
(£2.20 ex. VAT)
Carburettor gasket set for 1969 2cv6 until November 1979, single choke Solex 34PICS.
Part Number: KF001
£20.11
(£16.76 ex. VAT)
Carburettor gasket set only, for Solex 26 or 28BCI/CBI/IBC carburettor, used on old 425cc 2cv
Part Number: 01037
£16.80
(£14.00 ex. VAT)

Carburettor gasket set, for Solex, gasket and copper seals for twin choke OVAL NECK carburettor 2cv6 etc. 1982 onward.
Part Number: A1.1195
£16.44
(£13.70 ex. VAT)
Carburettor insulator spacer phenolic block for 26 or 28 single choke carburettor. See notes.
Part Number: A14298
£9.60
(£8.00 ex. VAT)
Carburettor insulator spacer phenolic block for 34pics single choke carburettor. See notes.
Part Number: 5490486
£9.72
(£8.10 ex. VAT)
Filters (0)
Filters


