Filters

Driveshaft gaiters

28 products

Showing 1 - 28 of 28 products
Driveshaft gaiter ONLY, outer, tougher BX style, constant velocity, wheel side. 2cv6 etc.
Driveshaft gaiter ONLY, outer, tougher BX style, constant velocity, wheel side. 2cv6 etc. Part Number: 03156
£5.64 (£4.70 ex. VAT)
Driveshaft gaiter ONLY, outer, ORIGINAL 1970s style, constant velocity, wheel side. 2cv6 etc.Driveshaft gaiter ONLY, outer, ORIGINAL 1970s style, constant velocity, wheel side. 2cv6 etc.
Driveshaft gaiter ONLY, outer, ORIGINAL 1970s style, constant velocity, wheel side. 2cv6 etc. Part Number: 03156A
£3.25 (£2.71 ex. VAT)
Driveshaft gaiter and plastic tie, middle, centre. 2cv6 etc.
Driveshaft gaiter and plastic tie, middle, centre. 2cv6 etc. Part Number: 03125
£5.40 (£4.50 ex. VAT)
Driveshaft gaiter ONLY, inner, gearbox end. 2cv6 etc.
Driveshaft gaiter ONLY, inner, gearbox end. 2cv6 etc. Part Number: 03161
£6.72 (£5.60 ex. VAT)
Driveshaft gaiter KIT (one gaiter) outer, constant velocity, wheel side. 2cv6 etc.
Driveshaft gaiter KIT (one gaiter) outer, constant velocity, wheel side. 2cv6 etc. Part Number: 03155
£13.20 (£11.00 ex. VAT)
Driveshaft gaiter KIT (one gaiter), inner, gearbox end. 2cv6 etc.
Driveshaft gaiter KIT (one gaiter), inner, gearbox end. 2cv6 etc. Part Number: 03160
£11.40 (£9.50 ex. VAT)
Driveshaft gaiters NEOPRENE, complete 2cv car kit of 6 gaiters with steel gaiter ties, grease and fitting cone.Driveshaft gaiters NEOPRENE, complete 2cv car kit of 6 gaiters with steel gaiter ties, grease and fitting cone.
Driveshaft gaiters NEOPRENE, complete 2cv car kit of 6 gaiters with steel gaiter ties, grease and fitting cone. Part Number: A1.0118
£69.60 (£58.00 ex. VAT)
A cone shaped tool to aid fitment of all 2cv outer and spline gaiters, absolutely essential.
A cone shaped tool to aid fitment of all 2cv outer and spline gaiters, absolutely essential. Part Number: A1.2718
£5.20 (£4.33 ex. VAT)
Driveshaft gaiter, accessory part for single crosspin shaft on 2cv types A, AZ and AZUDriveshaft gaiter, accessory part for single crosspin shaft on 2cv types A, AZ and AZU
Driveshaft gaiter, accessory part for single crosspin shaft on 2cv types A, AZ and AZU Part Number: A1.0109
£13.50 (£11.25 ex. VAT)
Driveshaft gaiter kit, includes 2 x rubber band ties, neoprene, only for old double cardan type shaft.
Driveshaft gaiter kit, includes 2 x rubber band ties, neoprene, only for old double cardan type shaft. Part Number: A1.0099
£13.20 (£11.00 ex. VAT)
Driveshaft gaiter, neoprene, only for old double cardan type shaft.
Driveshaft gaiter, neoprene, only for old double cardan type shaft. Part Number: 37399
£9.90 (£8.25 ex. VAT)
Rubber ring to fasten double cardan gaiter.
Rubber ring to fasten double cardan gaiter. Part Number: 37396
£3.12 (£2.60 ex. VAT)
Driveshaft hub nut, outer, front, 32mm across flats, castellated.Driveshaft hub nut, outer, front, 32mm across flats, castellated.
Driveshaft hub nut, outer, front, 32mm across flats, castellated. Part Number: 03105
£5.94 (£4.95 ex. VAT)
Ligarex banding, 430 grade stainless, 5mm wide x 0.3mm thick, 25 metres long. Clips must be ordered separately.
Ligarex banding, 430 grade stainless, 5mm wide x 0.3mm thick, 25 metres long. Clips must be ordered separately. Part Number: 2105
£20.66 (£17.22 ex. VAT)
Ligarex banding, 430 grade stainless, 5mm wide x 0.3mm thick, 50 metres long. Clips must be ordered separately
Ligarex banding, 430 grade stainless, 5mm wide x 0.3mm thick, 50 metres long. Clips must be ordered separately Part Number: 2109
£39.72 (£33.10 ex. VAT)
Ligarex clips, for 5mm banding, clip is 6mm wide, 430 grade stainless, pack of 100
Ligarex clips, for 5mm banding, clip is 6mm wide, 430 grade stainless, pack of 100 Part Number: 2106
£11.92 (£9.93 ex. VAT)
Ligarex plastic dispenser ONLY, empty dispenser, capacity 50 metres 5mm Ligarex banding. See notes.
Ligarex plastic dispenser ONLY, empty dispenser, capacity 50 metres 5mm Ligarex banding. See notes. Part Number: 2104
£40.80 (£34.00 ex. VAT)
Genuine Ligarex plier only and instructions.Genuine Ligarex plier only and instructions.
Genuine Ligarex plier only and instructions. Part Number: 2108
£85.48 (£71.23 ex. VAT)
Ligarex banding, 430 grade stainless, 8mm wide x 0.3mm thick, 25 metres long. Clips must be ordered separately.
Ligarex banding, 430 grade stainless, 8mm wide x 0.3mm thick, 25 metres long. Clips must be ordered separately. Part Number: F1208
£22.13 (£18.44 ex. VAT)
Ligarex clips, for 8mm banding, clip is 8mm wide, 430 grade stainless, pack of 100
Ligarex clips, for 8mm banding, clip is 8mm wide, 430 grade stainless, pack of 100 Part Number: B1508
£20.75 (£17.29 ex. VAT)
Neoprene, strong, supple, driveshaft gaiter, middle, centre. 2cv6 etc. Best quality - longer lasting.Neoprene, strong, supple, driveshaft gaiter, middle, centre. 2cv6 etc. Best quality - longer lasting.
Neoprene, strong, supple, driveshaft gaiter, middle, centre. 2cv6 etc. Best quality - longer lasting. Part Number: 03127
£9.82 (£8.18 ex. VAT)
Neoprene, strong, very supple, driveshaft gaiter ONLY, inner, gearbox end. 2cv6 etc.Neoprene, strong, very supple, driveshaft gaiter ONLY, inner, gearbox end. 2cv6 etc.
Neoprene, strong, very supple, driveshaft gaiter ONLY, inner, gearbox end. 2cv6 etc. Part Number: 03167
£10.42 (£8.68 ex. VAT)
Neoprene, strong, very supple, driveshaft gaiter ONLY, outer, constant velocity, wheel side. 2cv6 etc.Neoprene, strong, very supple, driveshaft gaiter ONLY, outer, constant velocity, wheel side. 2cv6 etc.
Neoprene, strong, very supple, driveshaft gaiter ONLY, outer, constant velocity, wheel side. 2cv6 etc. Part Number: 03157
£10.86 (£9.05 ex. VAT)
Tool, pliers for driveshaft gaiter band clips, for ear type clips used in most of our gaiter kits..
Tool, pliers for driveshaft gaiter band clips, for ear type clips used in most of our gaiter kits.. Part Number: CT3023
£9.95 (£8.29 ex. VAT)
Spare nylon tie-wrap to fix outer or middle driveshaft gaiters only (not long enough for inner gaiters) PACK OF 10.
Spare nylon tie-wrap to fix outer or middle driveshaft gaiters only (not long enough for inner gaiters) PACK OF 10. Part Number: 03162
£0.72 (£0.60 ex. VAT)
Split pin, 5mmx50mm (for driveshaft nut)
Split pin, 5mmx50mm (for driveshaft nut) Part Number: 03106
£0.25 (£0.21 ex. VAT)
Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies.Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies.
Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies. Part Number: AM37389
£12.72 (£10.60 ex. VAT)
Driveshaft gaiter clip clamp, fits Ø25MM to 45MM, stainless steel, fits small end of outer drive shaft gaiter.
Driveshaft gaiter clip clamp, fits Ø25MM to 45MM, stainless steel, fits small end of outer drive shaft gaiter. Part Number: A1.0152
£1.49 (£1.24 ex. VAT)

Recently viewed