Accelerator pump bearing pin used on some 26/35 carburettors.
Part Number: A1.1277
£3.80
(£3.17 ex. VAT)
Accelerator pump diaphragm for 26/35 scis/csic Solex for 2cv6 etc.
Part Number: KF349
£6.90
(£5.75 ex. VAT)
Accelerator pump diaphragm for 34 pics single barrel carburettor
Part Number: A1.1263
£6.95
(£5.79 ex. VAT)
Accelerator pump spring for KF349 on 26/35 carburettor 2cv6 etc.
Part Number: A1.1160
£2.10
(£1.75 ex. VAT)
Carburettor accelerator throttle return spring 75mm long from 26/35 carburettor to engine cowl.
Part Number: 20119
£1.96
(£1.63 ex. VAT)
Carburettor insulater spacer block flange 9.5mm thick for 26/35 carburettor (Dolly, Charleston etc...). See notes.
Part Number: 01919
£12.95
(£10.79 ex. VAT)
Carburettor insulator spacer phenolic block for 26 or 28 single choke carburettor. See notes.
Part Number: A14298
£9.60
(£8.00 ex. VAT)
Carburettor insulator spacer phenolic block for 34pics single choke carburettor. See notes.
Part Number: 5490486
£9.60
(£8.00 ex. VAT)
Carburettor spindle return spring for 26/35scic (twin choke, oval top), 18/26, inner, larger spring, July 1980 onward.
Part Number: 10338
£3.30
(£2.75 ex. VAT)
Carburettor spindle return spring for 26/35scic (twin choke, oval top), 18/26, outer, smaller diameter spring. July 1980 onward.
Part Number: 10223
£3.30
(£2.75 ex. VAT)
Carburettor spindle return spring for 26/35scic (twin choke, oval top), 21/24, primary, front spring up to June 1980.
Part Number: A1.1170
£2.38
(£1.98 ex. VAT)
Carburettor spindle return spring for 26/35scic (twin choke, oval top), 21/24, secondary, rear spring. Up to June 1980
Part Number: A1.1171
£2.38
(£1.98 ex. VAT)
Choke cable fixed lower bracket part for 26/35 carburettor
Part Number: A1.1168
£7.20
(£6.00 ex. VAT)
Choke pull-off diaphragm unit substitute blanking plate. July 1980 onward.
Part Number: KF351
£3.50
(£2.92 ex. VAT)
Choke pull-off vacuum device diaphragm unit for carburettor 2cv6 June 1980 onwards.
Part Number: 95568478
£34.80
(£29.00 ex. VAT)
Clip to hold accelerator throttle control rod to 28cbi carburettor, 18HP AZ not for Dolly, Charleston etc...See Notes
Part Number: AZ124121
£7.80
(£6.50 ex. VAT)
Clip to hold accelerator throttle control rod to 34pics carburettor, single choke, not for Dolly, Charleston etc...See notes
Part Number: 5420120
£4.68
(£3.90 ex. VAT)
Floats assembly for 26/35 twin choke, oval top, 2cv carburettor
Part Number: 403A5
£29.50
(£24.58 ex. VAT)
Floats height setting tool for 26/35 oval top Solex, all Dolly, Charleston etc
Part Number: T1403
£14.95
(£12.46 ex. VAT)
Nut, M8x1.25, 12mm across flats and washer holding carburettor to manifold.
Part Number: 25102
£2.50
(£2.08 ex. VAT)
Pipe from air filter (metal air box) to 1969 to 1978 34PICS round top single double venturi carburettor fitted to 2cv4 and 2cv6.
Part Number: U1713
£17.60
(£14.67 ex. VAT)
Pipe from air filter to 26/35 oval top carburettor, 2cv6, Dolly, Charleston.
Part Number: 01918
£16.94
(£14.12 ex. VAT)
Pipe from air filter to twin choke carburettor, AMI 8 only. See notes.
Part Number: 1713A
£23.95
(£19.96 ex. VAT)
Pipe from air filter to twin choke oval top carburettor, Acadiane, Mehari, Dyane 6 only.
Part Number: 80812
£23.80
(£19.83 ex. VAT)
Return spring choke flap lever 26/35 oval top carburettor (often drops off)
Part Number: 01921
£1.90
(£1.58 ex. VAT)
Set of 5 M5x0.75 screws for lid of 26/35 oval top carburettor, 2cv6.
Part Number: A5.0594
£9.98
(£8.32 ex. VAT)
V - clip, joins carburettor return spring to engine cowling
Part Number: 20121
£0.98
(£0.82 ex. VAT)
Worm drive clip, jubilee style, 50mm to 70mm, fastener for air filter end of pipe 01918 etc.
Part Number: T5070
£1.10
(£0.92 ex. VAT)
Worm drive clip, jubilee style, 70mm to 90mm, to fasten heat escape dump tube to exchanger.
Part Number: T7090
£1.10
(£0.92 ex. VAT)