Filters

Engine tools

19 products

Showing 1 - 19 of 19 products
Clutch plate alignment, centralising tool and spigot bush removal tool.Clutch plate alignment, centralising tool and spigot bush removal tool.
Clutch plate alignment, centralising tool and spigot bush removal tool. Part Number: A1.2765
£22.80 (£19.00 ex. VAT)
Cranked spanner to remove carburettor nuts. NEW DESIGN, PERFECT FIT.Cranked spanner to remove carburettor nuts. NEW DESIGN, PERFECT FIT.
Cranked spanner to remove carburettor nuts. NEW DESIGN, PERFECT FIT. Part Number: BT2014
£35.96 (£29.97 ex. VAT)
Cylinder glaze buster hone with 3 fitted stones. 35mm to 85mm. See important details notes.Cylinder glaze buster hone with 3 fitted stones. 35mm to 85mm. See important details notes.
Cylinder glaze buster hone with 3 fitted stones. 35mm to 85mm. See important details notes. Part Number: 2070
£29.00 (£24.17 ex. VAT)
Dynamo removal tool puller for 2cvs with crank mounted dynamo armature.
Dynamo removal tool puller for 2cvs with crank mounted dynamo armature. Part Number: A1.2703
£51.65 (£43.04 ex. VAT)
Front crank shaft seal installation toolFront crank shaft seal installation tool
Front crank shaft seal installation tool Part Number: A1.2761
£19.76 (£16.47 ex. VAT)
Helical coil insert kit to replace ten stripped spark plug threads. M14x1.25, 1/2" reach.
Helical coil insert kit to replace ten stripped spark plug threads. M14x1.25, 1/2" reach. Part Number: UN38142
£58.80 (£49.00 ex. VAT)
Helical M7 x 1.00 thread repair insert kit, with 24 repair coils, for oil feed to cylinder head + any other M7 thread in aluminium
Helical M7 x 1.00 thread repair insert kit, with 24 repair coils, for oil feed to cylinder head + any other M7 thread in aluminium Part Number: UN35070
£21.00 (£17.50 ex. VAT)
Ignition timing rod tool for 2cv6 and Dolly, Dyane 6, Acadiane etc., all cars with M28 type engine.
Ignition timing rod tool for 2cv6 and Dolly, Dyane 6, Acadiane etc., all cars with M28 type engine. Part Number: A1.2772
£9.62 (£8.02 ex. VAT)
Manometer kit to test breather function, crankcase depression
Manometer kit to test breather function, crankcase depression Part Number: A1.2705
£19.92 (£16.60 ex. VAT)
Oil Filter tool, 3/8" drive, for easy removal of PURFLUX filter.Oil Filter tool, 3/8" drive, for easy removal of PURFLUX filter.
Oil Filter tool, 3/8" drive, for easy removal of PURFLUX filter. Part Number: TF76
£12.06 (£10.05 ex. VAT)
Piston gudgeon pin removal tool. Out of stock.
Piston gudgeon pin removal tool. Out of stock. Part Number: GT2015
£0.00 (£0.00 ex. VAT)
Piston ring clamp, 70 to 75mm, perfect for 2cv6 = 74mm!
Piston ring clamp, 70 to 75mm, perfect for 2cv6 = 74mm! Part Number: LC072
£11.75 (£9.79 ex. VAT)
Piston ring compressor 2cv6 74mm only. Appearance will vary.
Piston ring compressor 2cv6 74mm only. Appearance will vary. Part Number: GT2012
£21.00 (£17.50 ex. VAT)
Piston ring pliers
Piston ring pliers Part Number: 251375
£7.94 (£6.62 ex. VAT)
Rear crank shaft seal installation tool.Rear crank shaft seal installation tool.
Rear crank shaft seal installation tool. Part Number: A1.2762
£20.82 (£17.35 ex. VAT)
Rocker shaft screw socket tool to remove flat sided bolts, 3/8" drive socket. Fits 2cv also HY van.Rocker shaft screw socket tool to remove flat sided bolts, 3/8" drive socket. Fits 2cv also HY van.
Rocker shaft screw socket tool to remove flat sided bolts, 3/8" drive socket. Fits 2cv also HY van. Part Number: A1.2767
£17.35 (£14.46 ex. VAT)
Tool to fit valve stem seals. OUT OF STOCK.
Tool to fit valve stem seals. OUT OF STOCK. Part Number: GT2024
£0.00 (£0.00 ex. VAT)
Tool to insert crankshaft spigot bush and spigot bush sealTool to insert crankshaft spigot bush and spigot bush seal
Tool to insert crankshaft spigot bush and spigot bush seal Part Number: A1.2753
£19.79 (£16.49 ex. VAT)
Wiring terminal (insulated) crimp tool.
Wiring terminal (insulated) crimp tool. Part Number: AM1
£4.96 (£4.13 ex. VAT)

Recently viewed