Engine, 2cv6, re-conditioned, exchange.
Part Number: V621603-1-1
Excl. Surch. £2,364.00(£1,970.00 ex. VAT)
Engine front air ducting, cooling cowling for disc brake 2cv6
Part Number: 95578338
£178.80
(£149.00 ex. VAT)
Set of self tap screws & clips to hold METAL ducting together. 14 screws, 14 speed clips, 4 washers.
Part Number: ST4813SET
£6.60
(£5.50 ex. VAT)
Engine mount 2cv6 etc. 2 per car, price each. See notes about which cars this fits.
Part Number: 03180
£10.40
(£8.67 ex. VAT)
Gearbox mount 2CV6, Dyane6, Acadiane, Ami8, Mehari, AK400 etc,, etc.. 1 needed per car
Part Number: 03175
£13.40
(£11.17 ex. VAT)
Dipstick guide rubber tube, made from Viton for some 425cc engines.
Part Number: A22195
£14.99
(£12.49 ex. VAT)
Engine, gearbox sump plug screw, 2cv/Dyane, MAGNETIC, 21mm across flats.
Part Number: 22119
£7.80
(£6.50 ex. VAT)
Washer, 16x22x2, crushable copper, for engine, gearbox sump or filler screw.Each
Part Number: 00405
£0.25
(£0.21 ex. VAT)
Flywheel bolt, stretch bolt, one time use, for 602cc engine (5 required), price per bolt.
Part Number: 29058ALT
£3.60
(£3.00 ex. VAT)
Nut, flange, M7 x 1.00 copper plated, for exhaust manifold stud
Part Number: 00917
£1.16
(£0.97 ex. VAT)
Washer, shakeproof, plated, M7 x 12.3mm. Per single washer
Part Number: 695857
£0.13
(£0.11 ex. VAT)
Stud for exhaust manifold, M7 x 1.00 x 40, threaded 25mm, 8mm.
Part Number: 00914
£2.76
(£2.30 ex. VAT)
Flywheel bolt for Visa 652cc, M9x1.00, 28mm long, high tensile 10.9 Price for one - 6 needed for one car.
Part Number: 75507631
£4.99
(£4.16 ex. VAT)
Full set of screws, speednuts, bolts & nuts to hold engine cooling ducting together.
Part Number: A5.0002
£30.00
(£25.00 ex. VAT)
Lock tab washer for M10 for underside engine mount bolt.
Part Number: ZC9611020U
£1.96
(£1.63 ex. VAT)
Oil, dust seal for crankshaft spigot bush (pilot) Oil/dust seal ONLY, 12 x 18.
Part Number: 95074
£3.24
(£2.70 ex. VAT)
Small end, connecting rod bush 2cv AZ etc. Aftermarket, NON split type. PER SINGLE BUSH
Part Number: AZ1212
£8.00
(£6.67 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, 12x18x16, standard size, sintered bronze bearing (which is like oilite).
Part Number: 20103
£9.35
(£7.79 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, NON-STANDARD EXTERNAL OVERSIZE, 12x18.2x16 phosphor-bronze (calcar). SEE NOTES.
Part Number: 75420102
£11.26
(£9.38 ex. VAT)
Set of 4 plated steel nuts, M10x1.50, used for joining engine to gearbox on most 2cv models.
Part Number: NT10X4
£2.40
(£2.00 ex. VAT)
UPPER stud for joining engine to gearbox, 2cv6, M10x1.50, L=87mm. Two fitted to car - our price is for ONE.
Part Number: 26163029
£4.90
(£4.08 ex. VAT)
LOWER LEFT stud for joining engine to gearbox, 2cv6, M10x1.50, L=80mm. One fitted to car.
Part Number: 26163039
£4.90
(£4.08 ex. VAT)
LOWER RIGHT stud for joining engine to gearbox, 2cv6, M10x1.50, L=75mm. One fitted to car.
Part Number: 26163049
£4.90
(£4.08 ex. VAT)
Rocker shaft screw for 2cv etc, M8x34, rectangular head shape as original.
Part Number: 26228129
£3.60
(£3.00 ex. VAT)
Washer, shakeproof, plated, M7 x 12.3mm. Bulk pack of 200 washers.
Part Number: 695857x200
£9.60
(£8.00 ex. VAT)
Aluminium finned, extra cooling rocker cover. Price per single item.
Part Number: A1.4387
£54.72
(£45.60 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, 12x18x12, standard size, needle roller bearing used on cars with traffic clutch but may be used on virtually any 2cv.
Part Number: 7903090173
£9.35
(£7.79 ex. VAT)
Small end, connecting rod, PAIR, wrist pin bush ALL 2cv, Dyane etc. Original split steel, lead bronze lined type. PER PAIR OF BUSHES
Part Number: AM1212
£33.60
(£28.00 ex. VAT)