Camshaft rear bearing/oil pump housing with rotors 10.5mm up to 1980
Part Number: V01
£95.00
(£79.17 ex. VAT)
Camshaft rear bearing/oil pump housing with rotors 11.2mm 1980 onward.
Part Number: 95559620EB
£117.60
(£98.00 ex. VAT)
Copper sealing washer 7mmx13mmx1.4mm, used for cylinder head oil feed etc, pack of 10 washers.
Part Number: 133964
£4.08
(£3.40 ex. VAT)
Double copper seal washer on crankcase to cyl head oil feed
Part Number: 00800
£1.68
(£1.40 ex. VAT)
Oil feed pipe assembly, copper nickel, from crankcase to cylinder heads 2cv6.
Part Number: 00913
£49.20
(£41.00 ex. VAT)
Oil feed pipe assembly, Visa 652cc ONLY (not for 2cv), copper nickel, from crankcase to cyl heads.
Part Number: 1027401
£49.00
(£40.83 ex. VAT)
Oil low pressure sender switch 602cc, bullet connector 1968 to 1972
Part Number: 12280
£7.82
(£6.52 ex. VAT)
Oil low pressure sender switch 602cc, Lucar connector 1970> MOST COMMON TYPE.
Part Number: 00450
£8.00
(£6.67 ex. VAT)
Oil low pressure sender switch 602cc, screw connector 1972 to 1977??
Part Number: 10200
£9.35
(£7.79 ex. VAT)
Oil temperature sensor sender, M16x1.50 to fit in place of sump screw. 6volts to 12volts.
Part Number: A2.2489
£31.25
(£26.04 ex. VAT)
Union screw, banjo bolt, M7 x 1.00, for BPOHA1 braided flexible oil feed, cylinder head, one only, see notes.
Part Number: BP20-B
£30.00
(£25.00 ex. VAT)
Union screw, banjo bolt, M7 x 1.00, for BPOHA1 braided flexible oil feed, engine block centre, one only, see notes.
Part Number: BP22-C
£38.40
(£32.00 ex. VAT)
Union, banjo bolt, M7 x 1.00, extra long 26mm for standard oil feed pipe, screw oil feed pipe to cylinder head. 1mm supply hole.
Part Number: 15425L
£7.50
(£6.25 ex. VAT)
Union, banjo bolt, M7 x 1.00, for standard oil feed pipe, screw oil feed pipe to cyl head 1mm supply
Part Number: 75415425
£11.40
(£9.50 ex. VAT)
Union, banjo bolt, M7 x 1.00, for standard oil feed pipe, screw oil feed pipe to engine block 2mm supply
Part Number: 12174
£8.40
(£7.00 ex. VAT)