Filters

Heating & ventilating

26 products

Showing 1 - 26 of 26 products
Set of 4 heater tubes for 2cv6 right hand drive (UK model).
Set of 4 heater tubes for 2cv6 right hand drive (UK model). Part Number: 99292
£31.00 (£25.83 ex. VAT)
Set of 5 heater tubes for 2cv6 etc. left hand drive (EU model).
Set of 5 heater tubes for 2cv6 etc. left hand drive (EU model). Part Number: 99295
£32.42 (£27.02 ex. VAT)
Tube to screen heater demister left hand side of all 2cv4/2cv6. See notes
Tube to screen demister right hand for right hand drive (UK) 2cv, 1977 onward.
Heater escape (dump) tube, original cardboard, heat exchanger through wing.
Heater escape (dump) tube, for 2cv only, high quality rubber, heat exchanger through wing.
Heater escape (dump) tube, high quality rubber, for Ami 8, Dyane, Acadiane, heat exchanger to wing.
Heater tube, 2cv, old felt type with wire approx. 520mm
Heater tube, 2cv, old felt type with wire approx. 520mm Part Number: 4391J
£11.08 (£9.23 ex. VAT)
Clip to locate heater cable end on some older heat exchangers and cable lever fittings Ami 8 etc
Double cable heat exchanger clamp foot.
Double cable heat exchanger clamp foot. Part Number: AZU64497
£3.40 (£2.83 ex. VAT)
Single cable heat exchanger clamp foot.
Single cable heat exchanger clamp foot. Part Number: 585698
£3.60 (£3.00 ex. VAT)
Heat exchanger box cable locating clip large, for left hand side
Heat exchanger box cable locating clip large, for left hand side Part Number: AM644103A
£4.50 (£3.75 ex. VAT)
Heat exchanger box cable locating clip small, for right hand side
Heat exchanger box cable locating clip small, for right hand side Part Number: AM644103
£4.50 (£3.75 ex. VAT)
Heater cable clamp joint block with screws
Heater cable clamp joint block with screws Part Number: AZU644101
£7.55 (£6.29 ex. VAT)
Heat dash distribution pull push operating rod 2cv.
Heat dash distribution pull push operating rod 2cv. Part Number: 96995271
£5.83 (£4.86 ex. VAT)
Heated glass rear window for 2cv. OUT OF STOCK
Heated glass rear window for 2cv. OUT OF STOCK Part Number: 20255
£59.00 (£49.17 ex. VAT)
Heater cable, between each heat exchanger.
Heater cable, between each heat exchanger. Part Number: 57785
£8.95 (£7.46 ex. VAT)
Heater cable, dash to left hand exchanger 2cv6. LEFT HAND DRIVE, does not fit UK market cars.
Heater control, STAINLESS STEEL, 2cv left hand drive.
Heater control, STAINLESS STEEL, 2cv left hand drive. Part Number: 95624996
£34.99 (£29.16 ex. VAT)
Heater tube, 2cv, old felt type, curved, plastic shield, with wire approx. 80x55x400mm
Repair plate, set of 2, for spring mounting point on heat exchangers.
Repair plate, set of 2, for spring mounting point on heat exchangers. Part Number: 211009
£5.36 (£4.47 ex. VAT)
Rubber gaiter in wing for escape tube duct
Rubber gaiter in wing for escape tube duct Part Number: 43155
£9.00 (£7.50 ex. VAT)
Tube to screen demister right hand, 67cm long, for OLD Right Hand Drive (UK) 2cv up to 1977 ONLY.
Worm drive clip, jubilee style, 70mm to 90mm, to fasten heat escape dump tube to exchanger.
Heater cable with command lever and bracket for Ami 8. 1080mm
Heater cable with command lever and bracket for Ami 8. 1080mm Part Number: AM64417D
£31.20 (£26.00 ex. VAT)

Recently viewed