Filters
ECAS2CV
1938 products
Showing 193 - 240 of 1938 products
Display
View
Brake adjuster spacer, front, Dyane 6, AK400, for 220mm drum, 9.2x24(19)x12.5mm
Part Number: am45186a
£5.50
(£4.58 ex. VAT)
Brake and clutch pedal gear assembly without accelerator pedal.
Part Number: 95566670
£111.00
(£92.50 ex. VAT)
Brake bleed nipple for wheel cylinder, front or rear of 2cv etc., M7 x 1.00 thread, 30mm total length
Part Number: 95578347
£2.56
(£2.13 ex. VAT)
Brake caliper, 100% NEW, 2cv/Dyane, fits either left or right. Ready to use. SEE IMPORTANT NOTES.
Part Number: 05800
£114.00
(£95.00 ex. VAT)
Brake discs, PAIR, high performance, 2cv, Dyane, Acadiane etc. Price is for one pair (two discs). See important notes.
Part Number: BD43116
£46.02
(£38.35 ex. VAT)
Brake drum, 2cv4/2cv6, 6 hole fitting, front 200mm int. diam. Made in France by France Tambour (FT)
Part Number: FT271
£79.45
(£66.21 ex. VAT)
Brake drum, Dyane6/AK400/Mehari front 220mm, 6 stud fastening, PER SINGLE DRUM
Part Number: BDR274
£90.00
(£75.00 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts left or right rear suspension arm.
Part Number: BP9/711
£12.43
(£10.36 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts master cylinder to front flexible. Ami 6.
Part Number: BP9/04
£10.49
(£8.74 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts master cylinder to rear union. 194cm long.
Part Number: BP9/039
£22.34
(£18.62 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts, Ami6, from front union to left or right front wheel cylinder.
Part Number: BP9/84
£10.72
(£8.93 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts, Ami6, master cylinder to rear junction. 253cm long
Part Number: BP9/694
£30.44
(£25.37 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts, cross over chassis pipe.
Part Number: BP9/191
£15.17
(£12.64 ex. VAT)
Brake pipe 4.5mm OD, M9 pipe nuts, zinc electroplated, 2cv, Mehari, 24cm. from front union to left or right front wheel cylinder.
Part Number: AK45331A
£12.34
(£10.28 ex. VAT)
Brake pipe 4.5mm OD, zinc electroplated steel, M9 pipe nuts master cylinder to rear union. 225cm long.
Part Number: AY45332B
£33.14
(£27.62 ex. VAT)
Brake pipe 4.5mm OD, zinc electroplated, 94cm., M9 pipe nuts, cross over chassis pipe.
Part Number: AM45333A
£17.50
(£14.58 ex. VAT)
Brake pipe compression union joint (gas style) for 3.5mm brake pipe. Non standard accessory repair part.
Part Number: A1.5887
£12.95
(£10.79 ex. VAT)
Brake pipe full set, LHM, for LHD (left hand drive only) cars with front disc brake except Acadiane.
Part Number: CI 002
£108.96
(£90.80 ex. VAT)
Brake pipe kit set, complete (all rigid tubing) 2cv 1952 to 1964 LEFT HAND DRIVE.
Part Number: K/2HES/LH
£213.60
(£178.00 ex. VAT)
Brake pipe kit set, copper, copper nickel, 2cv 10/63 until 1969, banjo at front, 4.5mm pipe, M9 at rear.
Part Number: K/2H9DR/LH
£213.60
(£178.00 ex. VAT)
Brake pipe on rear arm left or right, 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm, 495mm. Zinc electroplated steel.
Part Number: A45334
£32.00
(£26.67 ex. VAT)
Brake pipe on rear arm, LEFT, COPPER. 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm.
Part Number: BP14/69L
£34.80
(£29.00 ex. VAT)
Brake pipe on rear arm, RIGHT, COPPER. 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm.
Part Number: BP14/69R
£34.80
(£29.00 ex. VAT)
Brake pipe protective foam grommet seal where pipe from 53134 3-way union enters rear axle tube.
Part Number: 5413895
£4.20
(£3.50 ex. VAT)
Brake pipe seal, 4.5mm (LARGE) normal (old type DOT 4) fluid.
Part Number: 05399
£1.44
(£1.20 ex. VAT)
Brake pipe seal, PACK OF TEN, 3.5mm normal (old type DOT 4 fluid)
Part Number: 05390X10
£3.98
(£3.32 ex. VAT)
Brake pipe union, 3 way on rear axle 2cv etc. New lower price.
Part Number: 53134
£37.70
(£31.42 ex. VAT)
Brake pipe, 290mm, 4.5mm o.d., M9x1.25 union, zinc electroplated steel, from master cylinder to front flexible.
Part Number: AYB453353A
£8.64
(£7.20 ex. VAT)
Brake pipe, 3.5mm diameter, 8mm union, caliper to caliper link pipe.
Part Number: STA05
£9.24
(£7.70 ex. VAT)
Brake pipe, 3.5mm diameter, 8mm union, from master cylinder to caliper or union on gearbox, left hand drive or right hand drive, 1500mm.
Part Number: 75529696
£13.25
(£11.04 ex. VAT)
Brake pipe, 3.5mm, 2cv6 etc., master cyl to caliper. Right hand drive. See important notes.
Part Number: BP8/082
£22.80
(£19.00 ex. VAT)
Brake pipe, 3.5mm, 2cv6, Dyane 6, etc., copper nickel, front to rear, 8mm unions, master cylinder to rear axle union, fits LHD or RHD cars.
Part Number: BP8/216
£34.80
(£29.00 ex. VAT)
Brake pipe, 3.5mm, Acadiane only, copper nickel, from compensator to rear axle union, 8mm unions, fits LHD or RHD. Allow 2 to 3 days for delivery.
Part Number: BP8/591
£22.80
(£19.00 ex. VAT)
Brake pipe, 3.5mm, Acadiane only, from master cylinder to compensator copper nickel, 8mm unions, fits LHD only. Allow 2 to 3 days for delivery.
Part Number: BP8/905
£22.80
(£19.00 ex. VAT)
Brake pipe, 3.5mm, drum brake 2cv, from gearbox to drum, left or right.
Part Number: BP8/74
£8.45
(£7.04 ex. VAT)
Brake pipe, 3.5mm, LEFT, copper nickel, 2cv6, Dyane 6, most between 1970 and 1990, see important description notes.
Part Number: BP8/515/N
£42.00
(£35.00 ex. VAT)
Brake pipe, 3.5mm, RIGHT, copper nickel, 2cv6, Dyane 6, most between 1970 and 1990, see important description notes.
Part Number: BP8/515/O
£42.00
(£35.00 ex. VAT)
Brake pipe, 3.5mm, stainless steel, from master cylinder to caliper, LEFT HAND DRIVE ONLY, 2cv etc.
Part Number: 75529692
£21.48
(£17.90 ex. VAT)
Brake pipe, 6.3mm, front to rear, 1952 until 1964, copper or copper nickel, 1.98m.
Part Number: BP14/004
£52.80
(£44.00 ex. VAT)
Brake pipe, Ami6 etc., 650mm, 4.5mm o.d., M9x1.25 union, zinc electroplated steel, rear left or rear right.
Part Number: AM45334D/E
£17.00
(£14.17 ex. VAT)
Filters (0)
Filters