Filters
Latest Products
2053 products
Showing 385 - 432 of 2053 products
Display
View
Fuel pump with useful priming lever, 2cv6, 2cv4, Dyane 6, Ami 8 etc., 1970 onward. Burton part.
Part Number: A1.1079
£39.62
(£33.02 ex. VAT)
Brake pipe, copper nickel, front left, banjo type, 2cv, Ami6, 1964 to 1970.
Part Number: BP14/22
£34.80
(£29.00 ex. VAT)
Wing, 2cv, rear, left, made from zinc electroplated steel, quality part, good fit, made in EU.
Part Number: 300717
£70.76
(£58.97 ex. VAT)
Wing, 2cv, rear, right, made from zinc electroplated steel, quality part, good fit, made in EU.
Part Number: 300718
£70.76
(£58.97 ex. VAT)
Mirror. right, for door of AK400 or Acadiane, straight arm, non original part.
Part Number: 10800170
£49.20
(£41.00 ex. VAT)
Mirror. left, for door of AK400 or Acadiane, straight arm, non original part.
Part Number: 10800150
£49.20
(£41.00 ex. VAT)
Front seat cover pair, brown targa vinyl for 2cv Club inside corners both square, asymmetrical, outside both round, perfect for earlier Acadiane. See notes
Part Number: 224.014
£169.20
(£141.00 ex. VAT)
Floor plastic closing cap bung plug for 44mm hole above outrigger holding floor to chassis. There are 4 on a 2cv - our price is for ONE only.
Part Number: 5412368
£3.00
(£2.50 ex. VAT)
Nut, plated zinc & yellow, 11mm hex, M7 x 1.00mm pitch. PER ONE SINGLE NUT.
Part Number: NT7
£0.14
(£0.12 ex. VAT)
Tachometer, rev counter, 52mm diam., 12v, black bezel, black face, for 2cv engine, 0 to 8000rpm.
Part Number: LC52B
£34.80
(£29.00 ex. VAT)
Wiper blade, 2CV, by BURTON, push-on or screw fit, 255mm, these fit both types of ORIGINAL 2cv arms. PRICE PER PAIR.
Part Number: A1.6307
£10.42
(£8.68 ex. VAT)
Sun visor, 2cv, pair pale grey vinyl with steel brackets. Best quality. See description notes.
Part Number: 95574008*VC
£80.40
(£67.00 ex. VAT)
Push rod to drive fuel pump 2cv6 etc., 110.7mm, (used and inspected part)
Part Number: 75521611
£6.74
(£5.62 ex. VAT)
Worm drive clip, jubilee style, 32mm to 50mm, fastener used for the large end of 41376 filler neck sleeve
Part Number: KSGT3250
£1.20
(£1.00 ex. VAT)
Headlight lamp shell, 2cv, simply chromed plastic, round, Charleston etc. SEE IMPORTANT DESCRIPTION NOTES
Part Number: 76540
£50.40
(£42.00 ex. VAT)
Door aperture perimeter seal, front, for Dyane or Acadiane, fits either left or right.
Part Number: 95493251
£35.93
(£29.94 ex. VAT)
Door perimeter seal, rear right hand, pattern (copy) part, 2cv.
Part Number: 380134
£21.67
(£18.06 ex. VAT)
Door perimeter seal, rear left hand, pattern (copy) part, 2cv.
Part Number: 380133
£21.67
(£18.06 ex. VAT)
Door perimeter seal, front right hand, pattern (copy) part, 2cv.
Part Number: 380132
£28.80
(£24.00 ex. VAT)
Door perimeter seal, front left hand, pattern (copy) part, 2cv.
Part Number: 380131
£25.92
(£21.60 ex. VAT)
Brake pipe, 3.5mm diameter, 8mm union, from master cylinder to caliper or union on gearbox, left hand drive or right hand drive, 1500mm.
Part Number: 75529696
£13.25
(£11.04 ex. VAT)
Brake pipe, transverse crossover, 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm, 880mm
Part Number: A45333
£47.00
(£39.17 ex. VAT)
Brake pipe, front left, 2cv etc, 1950 to 1964, Ami6 to 1966, banjo type, 6.35mm, zinc electroplated steel, curved when fitted,150mm
Part Number: AZ45330A
£27.00
(£22.50 ex. VAT)
Brake pipe, front right, 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm, 290mm
Part Number: AZ45331A
£28.00
(£23.33 ex. VAT)
Brake pipe on rear arm left or right, 2cv etc, 1950 to 1964, Ami6 to 1963, banjo type, 6.35mm, 495mm
Part Number: A45334
£32.00
(£26.67 ex. VAT)
Brake pipe, Ami6 etc., 650mm, 4.5mm o.d., M9x1.25 union, zinc electroplated steel, rear left or rear right.
Part Number: AM45334D/E
£17.00
(£14.17 ex. VAT)
Brake pipe, 290mm, 4.5mm o.d., M9x1.25 union, zinc electroplated steel, from master cylinder to front flexible.
Part Number: AYB453353A
£8.64
(£7.20 ex. VAT)
Complete brake set for rear of 2cv Dolly etc, shoes, LHM cylinders, caps, 44mm nuts, fitting kit, ready to fit.
Part Number: 05255KIT
£79.00
(£65.83 ex. VAT)
Battery cable set, to starter motor positive and to negative ground on gearbox with body ground.
Part Number: A1.2391
£39.66
(£33.05 ex. VAT)
Clip to locate heater cable end on some older (until 1977) heat exchangers and cable lever fittings Ami 8 etc
Part Number: AM644103B
£2.50
(£2.08 ex. VAT)
Battery carrier yoke 2cv, now in grey powder coated stainless with built in bracket for voltage regulator.
Part Number: A1.2379
£21.36
(£17.80 ex. VAT)
Vacuum nipple for 123 tune plus ONLY ignition, connect to carburettor. Spare part already supplied with 123Tune ignition pack.
Part Number: A1.5116
£6.40
(£5.33 ex. VAT)
Carburettor insulator spacer phenolic block for Solex 40pics single choke carburettor.
Part Number: A1.1267
£14.50
(£12.08 ex. VAT)
Fuse connector holder clip for glass fuse in original fuse box.
Part Number: A1.2366
£1.45
(£1.21 ex. VAT)
Top gasket only, for Solex 26CBI or 28CBI or 28BCI single carburettors.
Part Number: A1.1255
£8.40
(£7.00 ex. VAT)
Bracket for flexible hose and pipe 6.35mm rear RIGHT on chassis top
Part Number: A45367A
£9.40
(£7.83 ex. VAT)
Bracket for flexible hose and pipe 6.35mm rear left on chassis top
Part Number: A45367
£9.40
(£7.83 ex. VAT)
Acadiane, clip to hold rear hoop to body, stainless steel with screw and washer.
Part Number: 715203
£9.60
(£8.00 ex. VAT)
Filters (0)
Filters