Filters

ecas2cv

1899 products

Showing 1633 - 1680 of 1899 products
Steel front dash parcel shelf, precisely made, 2cv RIGHT HAND DRIVE.
Steel front dash parcel shelf, precisely made, 2cv RIGHT HAND DRIVE. Part Number: AZ833204C
£106.80 (£89.00 ex. VAT)
Steering column base anti draft rubber gaiter, used up to July 1967 only.
Steering column base clamp only 2cv.
Steering column base clamp only 2cv. Part Number: 01947
£5.94 (£4.95 ex. VAT)
Steering column base pinch clamp complete with special lock nut, washers and 10.9 high tension bolt.Steering column base pinch clamp complete with special lock nut, washers and 10.9 high tension bolt.
Steering column base rubber gaiter, 2cv, Dyane, etc. 08/1967 onward. See notes.Steering column base rubber gaiter, 2cv, Dyane, etc. 08/1967 onward. See notes.
Steering column ignition lock switch assembly Dyane, Acadiane. DOES NOT FIT ANY 2CV!Steering column ignition lock switch assembly Dyane, Acadiane. DOES NOT FIT ANY 2CV!
Steering column tube clamp for old AZ 2cv before steering lock was fitted.Steering column tube clamp for old AZ 2cv before steering lock was fitted.
Steering column with universal joint for Mehari
Steering column with universal joint for Mehari Part Number: 5419032X
£114.34 (£95.28 ex. VAT)
Steering lock U - bolt 2cv, M7 x 1.00 thread, includes sheer nuts and rectangular washers.
Steering pinion 7 teeth, inc. ring nut and seal, 1965 to July 1975.
Steering pinion 7 teeth, inc. ring nut and seal, 1965 to July 1975. Part Number: 07550
£58.80 (£49.00 ex. VAT)
Steering pinion 8 teeth, super high original quality, inc. ring nut, seal and needle bearing.Steering pinion 8 teeth, super high original quality, inc. ring nut, seal and needle bearing.
Steering pinion ONLY 8 teeth, super high original quality. 2cv6 etc. 07/95 onward.Steering pinion ONLY 8 teeth, super high original quality. 2cv6 etc. 07/95 onward.
Steering pinion only, 7 teeth, old type, up to 1965, AZ, AZU.Steering pinion only, 7 teeth, old type, up to 1965, AZ, AZU.
Steering pinion only, 7 teeth, old type, up to 1965, AZ, AZU. Part Number: A44201
£50.40 (£42.00 ex. VAT)
Steering pinion ring nut, original, slotted top, with seal. M38x1.50Steering pinion ring nut, original, slotted top, with seal. M38x1.50
Steering pinion ring nut, original, slotted top, with seal. M38x1.50 Part Number: 5502740
£12.90 (£10.75 ex. VAT)
Steering pinion seal only.
Steering pinion seal only. Part Number: 25609
£3.50 (£2.92 ex. VAT)
Steering rack back slider push guide.Steering rack back slider push guide.
Steering rack back slider push guide. Part Number: AM4421A
£37.16 (£30.97 ex. VAT)
Steering rack guide block bush square. 2 on each car price is for 1.
Steering rack guide block bush square. 2 on each car price is for 1. Part Number: AZ44276
£6.24 (£5.20 ex. VAT)
Steering rack guide ring bush. after February 1983. i.d.=28.2mm, o.d.=34mm. See description notes.Steering rack guide ring bush. after February 1983. i.d.=28.2mm, o.d.=34mm. See description notes.
Steering rack guide ring bush. up to February 1983. i.d.=27.6mm, o.d.=34mm. See description notes.Steering rack guide ring bush. up to February 1983. i.d.=27.6mm, o.d.=34mm. See description notes.
Steering rack guide ring split tube and support plate, LHD only, 1965 until 1990Steering rack guide ring split tube and support plate, LHD only, 1965 until 1990
Steering wheel centre plaque for hard, 2cv special, two spoke wheel.Steering wheel centre plaque for hard, 2cv special, two spoke wheel.
Steering wheel centre plaque for hard, 2cv special, two spoke wheel. Part Number: 5490544.700
£8.70 (£7.25 ex. VAT)
Steering wheel, 2 spoke, hard black plastic, 2cv special
Steering wheel, 2 spoke, hard black plastic, 2cv special Part Number: 544700
£69.00 (£57.50 ex. VAT)
Stepped nylon washer for door lock, 2cv, 1973 onward. 8X21X3X2
Stepped nylon washer for door lock, 2cv, 1973 onward. 8X21X3X2 Part Number: AZ86191A
£1.20 (£1.00 ex. VAT)
Sticker, emblem, Attention LHM, for master cylinder reservoir, 42mm diam.
Stone grid mesh for Dyane and Acadiane, fits bonnet just behind Dyane grille.
Stone grid mesh, BEST FITTING, BEST QUALITY, fits bonnet just behind 2cv grille.Stone grid mesh, BEST FITTING, BEST QUALITY, fits bonnet just behind 2cv grille.
Stone guard grille, for 2cv6, Dolly etc., black, fits in front of engine cooling fan.
Stop and tail round lens only, red, for AK400 and Mehari
Stop and tail round lens only, red, for AK400 and Mehari Part Number: 5250C
£8.40 (£7.00 ex. VAT)
Striker plate, on bonnet, for bonnet catch, 2cv.Striker plate, on bonnet, for bonnet catch, 2cv.
Striker plate, on bonnet, for bonnet catch, 2cv. Part Number: 80258
£11.94 (£9.95 ex. VAT)
Stud for exhaust manifold, M7 x 1.00 x 38, threaded 15mm, 15mm.
Stud for exhaust manifold, M7 x 1.00 x 38, threaded 15mm, 15mm. Part Number: 00914
£2.64 (£2.20 ex. VAT)
Stud on OUTSIDE window frame 2cv, left or right.
Stud on OUTSIDE window frame 2cv, left or right. Part Number: 3677
£4.54 (£3.78 ex. VAT)
Stud oversize repair for cylinder head exhaust port, M7 x 1.00 & M8 x 1.25  x 43mm total length..
Stud, cylinder head 2cv6, lower, original, length 209mm.
Stud, cylinder head 2cv6, lower, original, length 209mm. Part Number: 75427959
£16.96 (£14.13 ex. VAT)
Stud, cylinder head 2cv6, upper, original, length 239mm.
Stud, cylinder head 2cv6, upper, original, length 239mm. Part Number: 75427958
£16.96 (£14.13 ex. VAT)
Stud, M9x1.25, 12mm/19mm, driveshaft to gearbox output flange, each
Stud, M9x1.25, 12mm/19mm, driveshaft to gearbox output flange, each Part Number: 5420020
£3.60 (£3.00 ex. VAT)
Sump guard tray plate, 4MM., aluminium.Sump guard tray plate, 4MM., aluminium.
Sump guard tray plate, 4MM., aluminium. Part Number: 63ALU
£124.91 (£104.09 ex. VAT)
Sun visor, 2cv, pair anthracite (dark) grey with steel brackets. Best quality. See description notes.
Sun visor, 2cv, pair pale grey vinyl with steel brackets. Best quality. See description notes.
Support bridge bracket for mobile boot lock tongue on boot lid 2cv.
Support bridge bracket for mobile boot lock tongue on boot lid 2cv. Part Number: AZ844123
£16.50 (£13.75 ex. VAT)
Support clamp around standard 32mm 2cv6 exhaust tailpipe.
Support clamp around standard 32mm 2cv6 exhaust tailpipe. Part Number: 15115
£2.34 (£1.95 ex. VAT)
Support yoke bracket for master cylinder.
Support yoke bracket for master cylinder. Part Number: AYB453352A
£54.00 (£45.00 ex. VAT)
Surround beading trim only for one Citroën door mirror, includes fitting instruction. Glass not included.

Recently viewed