Filters

Screw fasteners

63 products

Showing 1 - 48 of 63 products
Bolt for handbrake eccentric, M9x1.25, threaded 19mm, 32mm long.
Bolt for handbrake eccentric, M9x1.25, threaded 19mm, 32mm long. Part Number: 691842
£3.12 (£2.60 ex. VAT)
Bolt, holds caliper to gearbox, 2cv6 etc., m10x140, threaded 37mm, 10.9 high tensile
Bolt, plated, 11mm hex head, 8.8, M7 x 1.00, 70mm long, threaded 21mm. Per single screw
Brass nut to hold 2cv headlight to headlight bar.
Brass nut to hold 2cv headlight to headlight bar. Part Number: NT12175BRASS
£1.50 (£1.25 ex. VAT)
Copper grease anti seize paste, 20gm tube, helps nuts slip undone.
Copper grease anti seize paste, 20gm tube, helps nuts slip undone. Part Number: XCG020
£3.80 (£3.17 ex. VAT)
Copper sealing washer 7.1mmx10mmx1.0mm, used for cylinder head oil feed etc, pack of 10 washers.
Dinitrol plastic plug to close 10mm hole used for rustproofing in steel sections, bag of 24 pieces.
Flanged nut, 18mm across flats, to hold front wing of 2cv (4 used on each wing). Per 1 piece.
Flanged nut, set of 8 to hold both front wings of 2cv to body
Flanged nut, set of 8 to hold both front wings of 2cv to body Part Number: 12175SET
£4.50 (£3.75 ex. VAT)
Full set of screws, speednuts, bolts & nuts to hold engine cooling ducting together.
J - clip nut, (u - clip) for top of rear wing 2cv/Dyane. Per 1 piece.J - clip nut, (u - clip) for top of rear wing 2cv/Dyane. Per 1 piece.
J - clip nut, lug nut, u-nut, chimney nut, spire nut, threaded M7 x 1.00. Per 1 piece.J - clip nut, lug nut, u-nut, chimney nut, spire nut, threaded M7 x 1.00. Per 1 piece.
Nut, adjuster for clutch cable, M12x1.00, 19mm spanner size, 2 fitted to car. EACH
Nut, flanged, bright zinc plated, 8mm hex, M5 x 0.80mm pitch. Per 50 pieces.
Nut, flanged, M3, 5.5mm spanner size, holds vent flap shutter to body (12 fitted) Each
Nut, lock nut, for clutch cable, M12x1.00, 17mm spanner size, 1 fitted to car. EACH
Nut, plated zinc & yellow, 11mm hex, M7 x 1.00mm pitch. PER ONE SINGLE NUT.
Nut, plated, 11mm hex, M7 x 1.00mm pitch. Per 50 pieces.
Nut, plated, 11mm hex, M7 x 1.00mm pitch. Per 50 pieces. Part Number: NT7X50
£3.50 (£2.92 ex. VAT)
Nut, plated, 8mm hex, M5 x 0.80mm pitch. Per 50 pieces.
Nut, plated, 8mm hex, M5 x 0.80mm pitch. Per 50 pieces. Part Number: NT580
£4.70 (£3.92 ex. VAT)
Nut, stainless steel, 11mm hex, M7 x 1.00mm pitch. PACK 50 PIECES
Nut, stainless steel, 11mm hex, M7 x 1.00mm pitch. PACK 50 PIECES Part Number: NT7A2X50
£3.90 (£3.25 ex. VAT)
Nut, stainless steel, 11mm hex, M7 x 1.00mm pitch. Per 1 piece.
Nut, stainless steel, 11mm hex, M7 x 1.00mm pitch. Per 1 piece. Part Number: NT7A2
£0.29 (£0.24 ex. VAT)
Pack of 6 set screw M6x12 to hold clutch only 003396 to flywheel. See notes
Pack of 6 set screw M7 X 16 to hold clutch only 003436 to flywheel. See notes
Screw for top of rear wing 2cv, Dyane front or rear. Per 1 piece. See notes.
Screw, 10mm hex head, self tapping holds plastic fan to pulley. Per one piece. See notes
Set of self tap screws & clips to hold METAL ducting together. 14 screws, 14 speed clips, 4 washers.
Set screw (fully threaded bolt) M9 x 1.25 30mm length for mounting plate of fuel tank saddle.
Set screw holding front shock absorber mount plate to arm, M9x1.25 16mm. Per 1 piece.
Set screw M10 x 40mm, 10.9 spec., to hold anti - roll bar to shock absorber plates. Per 1 piece.
Set screw, for steering lever, plated, 11mm hex, M7 x 1.00, 27.5mm long, 10.9 high tensile, EACH
Set screw, for steering lever, plated, 11mm hex, M7 x 1.00, 37.5mm long, 10.9 high tensile, EACH
Set screw, plated, 11mm hex head, M7 x 1.00, 12mm long. Per 25
Set screw, plated, 11mm hex head, M7 x 1.00, 12mm long. Per 25 Part Number: SS712
£7.97 (£6.64 ex. VAT)
Set screw, plated, 11mm hex head, M7 x 1.00, 16mm long. Per 25
Set screw, plated, 11mm hex head, M7 x 1.00, 16mm long. Per 25 Part Number: SS716
£6.00 (£5.00 ex. VAT)
Set screw, plated, 11mm hex head, M7 x 1.00, 20mm long. Per 25.
Set screw, plated, 11mm hex head, M7 x 1.00, 20mm long. Per 25. Part Number: SS720
£13.50 (£11.25 ex. VAT)
Set screw, plated, 11mm hex head, M7 x 1.00, 25mm long, Per 25
Set screw, plated, 11mm hex head, M7 x 1.00, 25mm long, Per 25 Part Number: SS725
£7.25 (£6.04 ex. VAT)
Set screw, plated, 11mm hex head, M7 x 1.00, 30mm long, Sold per single screw.
Set screw, plated, 11mm hex head, M7 x 1.00, 40mm long. Per 25
Set screw, plated, 11mm hex head, M7 x 1.00, 40mm long. Per 25 Part Number: SS740
£7.80 (£6.50 ex. VAT)
Set screw, plated, 8mm hex head, M5 x 0.8, 12mm long, zinc & yellow passivate. Per 50
Set screw, plated, 8mm hex head, M5 x 0.8, 15mm long, zinc & yellow passivate. Per 50
Set screw, plated, 8mm hex head, M5 x 0.80, 20mm long. Per 50
Set screw, plated, 8mm hex head, M5 x 0.80, 20mm long. Per 50 Part Number: SS520
£4.42 (£3.68 ex. VAT)
Set screw, STAINLESS A2, 11mm hex head, M7 x 1.00, 35mm long, Sold per SINGLE screw.Set screw, STAINLESS A2, 11mm hex head, M7 x 1.00, 35mm long, Sold per SINGLE screw.
Split pin, 2.4mm x 18mm. Per 10
Split pin, 2.4mm x 18mm. Per 10 Part Number: 03107
£1.20 (£1.00 ex. VAT)

Recently viewed