Filters
Latest Products
2053 products
Showing 1729 - 1776 of 2053 products
Display
View
Copper grease anti seize paste, 20gm tube, helps nuts slip undone.
Part Number: XCG020
£3.80
(£3.17 ex. VAT)
Contact breaker points with condenser, original Valeo Ducellier, 2cv etc. 1970>
Part Number: D218
£13.94
(£11.62 ex. VAT)
Contact breaker points with condenser, good quality pattern part, 2cv etc. 1970>
Part Number: 1400200
£7.70
(£6.42 ex. VAT)
Contact breaker points only, 6 VOLT, 375cc, 425cc etc. Also 602cc M4 engine. (NOT Dolly)
Part Number: D305
£4.32
(£3.60 ex. VAT)
Contact breaker points only, 2cv etc. Suits Femsa or Ducellier system. 1970>
Part Number: D301DG
£5.90
(£4.92 ex. VAT)
Connector set 4mm bullet, 10 pairs male, female with rubber + colour sleeves.
Part Number: 2940541
£24.36
(£20.30 ex. VAT)
Connector set 3mm bullet, 10 pairs male, female with rubber + colour sleeves.
Part Number: 2940540
£34.80
(£29.00 ex. VAT)
Connector, male, 4mm bullet, just like original Citroen. Per one piece
Part Number: 5412276
£0.59
(£0.49 ex. VAT)
Connector, male, 3mm bullet, just like original Citroen. Per one piece
Part Number: az5124
£0.78
(£0.65 ex. VAT)
Connector, female, 4mm bullet, just like original Citroen. Per one piece
Part Number: 5420487
£0.59
(£0.49 ex. VAT)
Connector, female, 3mm bullet, just like original Citroen. Per one piece
Part Number: az5123
£0.78
(£0.65 ex. VAT)
Conical, thick, bevelled washer between headlight fastening nut and mount on headlight bar,
Part Number: 5443127
£4.80
(£4.00 ex. VAT)
Compression spring for idle mixture control for Solex 26/35 carburettor
Part Number: JPP06
£3.00
(£2.50 ex. VAT)
Complete headlamp unit, original VALEO, chromed plastic shell with LEFT HAND DRIVE H4 P43t fitting, SEE NOTES.
Part Number: 82600
£178.80
(£149.00 ex. VAT)
Combination tool, 1/2" drive, to remove 2CV wheel bearing lock ring or loosen rear 44mm hex. nut.
Part Number: A1.2702
£37.20
(£31.00 ex. VAT)
Clutch release bearing clip only for 2cv etc. coil spring type.
Part Number: 95576819
£7.20
(£6.00 ex. VAT)
Clutch release bearing 2cv etc. carbon conversion type up to 1968.
Part Number: 276707
£34.80
(£29.00 ex. VAT)
Clutch operating fork, top quality, 2cv6, Dyane6 etc. See notes about poor quality items elsewhere on the market.
Part Number: 3144C
£34.80
(£29.00 ex. VAT)
Clutch kit 2cv etc. from MARCH 1982 (diaphragm type), budget 18 splines diaphragm clutch kit made for Burton.
Part Number: 545301
£78.36
(£65.30 ex. VAT)
Clutch kit, 2cv etc., 8 splines 1952 to 1955, A + AU 1st model.
Part Number: 2300310
£115.00
(£95.83 ex. VAT)
Clutch kit, 2cv etc., 10 splines, 1955 to 1966, WITH centrifugal clutch.
Part Number: 2300312
£115.00
(£95.83 ex. VAT)
Clutch kit, 2cv etc., 10 splines, 1955 to 1966, NOT centrifugal clutch
Part Number: 2300311
£115.00
(£95.83 ex. VAT)
Clutch friction plate with anti shock springs, 2cv etc. 18 splines diaphragm type.
Part Number: 684617
£78.76
(£65.63 ex. VAT)
Clutch friction plate 2cv etc. 18 splines, coil spring type. Generally (not definitively) fits 1969 to March 1982.
Part Number: 264314
£42.00
(£35.00 ex. VAT)
Clutch friction plate 2cv etc. 03/1982 onward, 18 splines, diaphragm type. SEE IMPORTANT NOTES
Part Number: 266354
£25.00
(£20.83 ex. VAT)
Clutch friction plate, 10 splines, 1955 to 1966, for use WITH centrifugal clutch or standard clutch
Part Number: 2300007
£36.00
(£30.00 ex. VAT)
Clutch fork for 2cv with overhead clutch fork arm and carbon type bearing.
Part Number: 2300028
£49.94
(£41.62 ex. VAT)
Clutch cable 2cv6/Dy6 1970>1990, Right hand drive.(UK), overall length = 72cm. Adjuster nuts should be ordered separately if required.
Part Number: 30116
£28.10
(£23.42 ex. VAT)
Clutch cable, 2cv AZ, type with lever above gearbox, overall length 395mm
Part Number: 30114
£15.60
(£13.00 ex. VAT)
Clip to hold accelerator throttle control rod to 34pics carburettor, single choke, not for Dolly, Charleston etc...See notes
Part Number: 5420120
£4.68
(£3.90 ex. VAT)
Clip to hold accelerator throttle control rod to 28cbi carburettor, 18HP AZ not for Dolly, Charleston etc...See Notes
Part Number: AZ124121
£7.80
(£6.50 ex. VAT)
Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis.
Part Number: 4221A
£2.16
(£1.80 ex. VAT)
Clip, holds REAR of 2cv rear wing to body. New better quality part. One per wing, our price is for one clip.
Part Number: 9848U
£2.64
(£2.20 ex. VAT)
Clip for aluminium door trim strips, sold in a bag of 10 pieces
Part Number: A85420
£8.90
(£7.42 ex. VAT)
Clip bracket, screws onto bulkhead to fix voltage regulator.
Part Number: VRB1
£13.60
(£11.33 ex. VAT)
Clicking indicator switch, column mounted, 2cv4/2cv6, BEST QUALITY, NOS, made in France by Cartier, colour brown only.
Part Number: 251152C
£39.00
(£32.50 ex. VAT)
Clamp, exhaust, 49mm, complete, manifold to heat exch. to crossbox 2cv6 etc. See notes in description.
Part Number: C49
£2.36
(£1.97 ex. VAT)
Clamp, exhaust, 49mm, Burton, new high quality cast steel, complete, heat exch. to crossbox 2cv6 etc.
Part Number: A1.8139
£10.80
(£9.00 ex. VAT)
Clamp, exhaust, 47mm, complete, crossbox to interpipe 2cv6 etc. Only 1 on car. See description notes.
Part Number: C47
£3.24
(£2.70 ex. VAT)
Clamp, exhaust, 47mm, Burton, high quality cast steel, crossbox to interpipe 2cv6 etc. Only 1 on car.
Part Number: A1.8140
£10.80
(£9.00 ex. VAT)
Citroen chassis, VIN plate, 78mmx44mm, blank for you to stamp.
Part Number: 3800700
£9.60
(£8.00 ex. VAT)
Filters (0)
Filters