Filters

Latest Products

2059 products

Showing 1 - 48 of 2059 products
Front wing, Dyane, Acadiane right, new tooling, made from steel, cataphoretically primed.Front wing, Dyane, Acadiane right, new tooling, made from steel, cataphoretically primed.
Front wing, Dyane, Acadiane left, new tooling, made from steel, cataphoretically primed.Front wing, Dyane, Acadiane left, new tooling, made from steel, cataphoretically primed.
PTFE lined, stainless braided, brake flexible pipe hose, front, 2cv 1964 until 1970.PTFE lined, stainless braided, brake flexible pipe hose, front, 2cv 1964 until 1970.
PTFE lined, stainless braided, brake flexible pipe hose, front, 2cv/AU/AZU June 1952 until July 1964.PTFE lined, stainless braided, brake flexible pipe hose, front, 2cv/AU/AZU June 1952 until July 1964.
Aluminium louvre blind for 2cv rear - proper period accessory - straight from the '60's.Aluminium louvre blind for 2cv rear - proper period accessory - straight from the '60's.
Accelerator throttle control cable, (aftermarket) 2cv, Dyane, 985mm long, right hand drive, RHD (UK)Accelerator throttle control cable, (aftermarket) 2cv, Dyane, 985mm long, right hand drive, RHD (UK)
Lock nut, half nut for suspension tie rod, M11x1.00, stainless, 16mm spanner size 5mm thick.Lock nut, half nut for suspension tie rod, M11x1.00, stainless, 16mm spanner size 5mm thick.
Gearbox detent ball to locate selector rod, 7.5mm.
Gearbox detent ball to locate selector rod, 7.5mm. Part Number: ZD9411300U
£1.08 (£0.90 ex. VAT)
Boot, trunk, lid 2cv, MADE ON ORIGINAL TOOLING, properly cataphoretically black primed.Boot, trunk, lid 2cv, MADE ON ORIGINAL TOOLING, properly cataphoretically black primed.
Dash parcel shelf crossmember, fits under LHD or RHD shelf, supplied without cable and rod fittings.Dash parcel shelf crossmember, fits under LHD or RHD shelf, supplied without cable and rod fittings.
Bolt, holds caliper to gearbox, 2cv6 etc., m10x140, threaded 37mm, 10.9 high tensile
Cable clip, fan cover, for points ignition wire and inner wing repeater wire, 2cv.Cable clip, fan cover, for points ignition wire and inner wing repeater wire, 2cv.
Steering wheel centre plaque for hard, 2cv special, two spoke wheel.Steering wheel centre plaque for hard, 2cv special, two spoke wheel.
Steering wheel centre plaque for hard, 2cv special, two spoke wheel. Part Number: 5490544.700
£8.70 (£7.25 ex. VAT)
Vertical separation panel, right, between rear wing cavity and fuel tank, AK, AZU, Acadiane
Vertical separation panel, left between rear wing cavity and spare wheel locker, AK, AZU, AcadianeVertical separation panel, left between rear wing cavity and spare wheel locker, AK, AZU, Acadiane
HT leads, set of 2, 2cv only, red silicone, made in Italy.
HT leads, set of 2, 2cv only, red silicone, made in Italy. Part Number: A1.5166
£32.40 (£27.00 ex. VAT)
Clamp at base of gear lever stick, 2cv etc. CLAMP ONLY - BOLT, NUT OR WASHER NOT INCLUDED.Clamp at base of gear lever stick, 2cv etc. CLAMP ONLY - BOLT, NUT OR WASHER NOT INCLUDED.
Grommet, gaiter in bulkhead for rod operated carburettor to pass through. 2cv up to year 1966.
Above and below front parcel shelf lining for left hand drive Dyane or Acadiane. See description notes.
Accelerator throttle cable, Mehari only, 633mm, LEFT HAND DRIVE
Accelerator throttle cable, Mehari only, 633mm, LEFT HAND DRIVE Part Number: 75492414
£18.00 (£15.00 ex. VAT)
Long black wheel nut with domed top, 2cv etc., can not be used on cars with fitted hub caps M12x1.25.Long black wheel nut with domed top, 2cv etc., can not be used on cars with fitted hub caps M12x1.25.
Installation tool for gearbox driveshaft output seal (to use with seal 31x42x8).Installation tool for gearbox driveshaft output seal (to use with seal 31x42x8).
Brake pipe, 6.3mm, front to rear, 1952 until 1964, copper or copper nickel, 1.98m.
Save £58.94
Mud flap, Dyane only, rear, pair, with chevrons and simple, adaptable fittings. OFFER
Wiper motor crank rear lever arm for 2cv6 June 1981 onward - for cylindrical motor type.
Wiper spindle axle only for 2cv up to 1962, type with wipers driven by speedometer cable.Wiper spindle axle only for 2cv up to 1962, type with wipers driven by speedometer cable.
Stainless steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).Stainless steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).
Relay for headlights on some 2cv6 models, changeover, 5 pin, 12 volt, rated 40amp.
New, windscreen, front, HEATED, 2cv only, laminated. Will not deliver, collection only.New, windscreen, front, HEATED, 2cv only, laminated. Will not deliver, collection only.
Wiper arm (ONE) to fit Dyane or Acadiane, will fit ONLY SEV Marchal, Femsa or ArtoWiper arm (ONE) to fit Dyane or Acadiane, will fit ONLY SEV Marchal, Femsa or Arto
BARREL AND PISTON SET BIG BORE 12/18HP > CONVERT 425CC TO 530CC, 66MM BORE TO 74MM BORE, NEARLY 25% INCREASE

Recently viewed