Filters

Cylinder head + parts.

44 products

Showing 1 - 24 of 44 products
Brass washer to use between cylinder head nut and rocker arm, 8.4x16x1.6mm, price each.
Cup on push rod tube which pushes onto push rod tube seal.
Cup on push rod tube which pushes onto push rod tube seal. Part Number: 504637
£7.16 (£5.97 ex. VAT)
Cylinder head, new, 2cv6, left, OK FOR LEAD-FREE FUEL, includes valves but see notes.
Cylinder head, new, 2cv6, right, OK FOR LEAD-FREE FUEL, includes valves but see notes.
Exhaust valve 2cv, 12hp, 1954 to 1963, length 76.5mm, diameter 7.9mm
Exhaust valve 2cv, 12hp, 1954 to 1963, length 76.5mm, diameter 7.9mm Part Number: A1247
£19.96 (£16.63 ex. VAT)
Exhaust valve 2cv6, 'one piece', 2CV RACING CLUB UK spec., machined for better gas flow. SEE NOTES.
Exhaust valve 2cv6, standard original fitment.
Exhaust valve 2cv6, standard original fitment. Part Number: 51560
£10.67 (£8.89 ex. VAT)
Exhaust valve kit 425cc 2cv, 8.5mm diam x 88.7mm long, 32mm head. SEE IMPORTANT NOTES
Exhaust valve seat 2cv6 for unleaded fuel use. VERY difficult to fit, not DIY!
Exhaust valve Visa 652cc, does not fit 2cv.
Exhaust valve Visa 652cc, does not fit 2cv. Part Number: 95551314
£13.00 (£10.83 ex. VAT)
Full set of 6 high strength stainless steel studs to hold cylinder heads to 2cv6 engine block.
Inlet valve 2cv, 12hp, 1954 to 1963, length 77.3mm, diameter 7.9mm
Inlet valve 2cv, 12hp, 1954 to 1963, length 77.3mm, diameter 7.9mm Part Number: A1248
£18.95 (£15.79 ex. VAT)
Inlet valve 2cv6, 'one piece', 2CV RACING CLUB UK spec., machined for better gas flow. SEE NOTES.
Inlet valve 2cv6, standard original fitment.
Inlet valve 2cv6, standard original fitment. Part Number: 51559
£9.00 (£7.50 ex. VAT)
Inlet valve Visa 652cc, does not fit 2cv.
Inlet valve Visa 652cc, does not fit 2cv. Part Number: 95551313
£12.00 (£10.00 ex. VAT)
Nut, flange, M7 x 1.00 copper plated, for exhaust manifold stud
Nut, flange, M7 x 1.00 copper plated, for exhaust manifold stud Part Number: 00917
£1.16 (£0.97 ex. VAT)
Push rod tube 2cv6, length 155mm, difficult to fit, in stock
Push rod tube 2cv6, length 155mm, difficult to fit, in stock Part Number: 516420
£15.90 (£13.25 ex. VAT)
Push rod, engine pushrod 2cv6 etc., 286.3mm
Push rod, engine pushrod 2cv6 etc., 286.3mm Part Number: 87233
£22.75 (£18.96 ex. VAT)
Rocker arm spring 2cv left, az 2cv 12hp
Rocker arm spring 2cv left, az 2cv 12hp Part Number: A12416
£3.60 (£3.00 ex. VAT)
Rocker arm spring 2cv right, az 2cv 12hp
Rocker arm spring 2cv right, az 2cv 12hp Part Number: A12416A
£3.60 (£3.00 ex. VAT)
Rocker cover nut
Rocker cover nut Part Number: 20118
£2.22 (£1.85 ex. VAT)
Spring (wavy) washer on rocker shaft
Spring (wavy) washer on rocker shaft Part Number: 696311
£1.30 (£1.08 ex. VAT)
Spring on push rod tube
Spring on push rod tube Part Number: 16419
£3.85 (£3.21 ex. VAT)
Stud for exhaust manifold, M7 x 1.00 x 40, threaded 20mm, 13mm.
Stud for exhaust manifold, M7 x 1.00 x 40, threaded 20mm, 13mm. Part Number: 00914
£1.96 (£1.63 ex. VAT)

Recently viewed