Filters

All products

2133 products

Showing 1777 - 1824 of 2133 products
Special Offer, set of 5 Michelin X tyre 125/90R15, 125r15, tubeless, new, original genuine. Fitted, as original to ALL 2cv from 1960 to 1990.Special Offer, set of 5 Michelin X tyre 125/90R15, 125r15, tubeless, new, original genuine. Fitted, as original to ALL 2cv from 1960 to 1990.
Special Offer, set of 5 Michelin X tyre 125/90R15, 125r15, tubeless, new, original genuine. Fitted, as original to ALL 2cv from 1960 to 1990. Part Number: 5X12515
£450.00 (£375.00 ex. VAT)
Speedometer cable 2cv6, Dyane6, RIGHT HAND DRIVE (UK), 1970 to 1990. 1150mm.Speedometer cable 2cv6, Dyane6, RIGHT HAND DRIVE (UK), 1970 to 1990. 1150mm.
Speedometer cable 2cv6, Dyane6, RIGHT HAND DRIVE (UK), 1970 to 1990. 1150mm. Part Number: 1282A
£34.80 (£29.00 ex. VAT)
Speedometer cable 2cv6/Dy6. after 1979, Ami 8, 79cm, LEFT HAND DRIVE
Speedometer cable 2cv6/Dy6. after 1979, Ami 8, 79cm, LEFT HAND DRIVE Part Number: 5213B
£21.60 (£18.00 ex. VAT)
Speedometer cable 2cv6/Dy6. up to 1979, 92cm, LEFT HAND DRIVE
Speedometer cable 2cv6/Dy6. up to 1979, 92cm, LEFT HAND DRIVE Part Number: 69004
£32.38 (£26.98 ex. VAT)
Speedometer cable for 2cvs with wiper mechanism driven by cable drive, 90cm. 3MM.
Speedometer cable for 2cvs with wiper mechanism driven by cable drive, 90cm. 3MM. Part Number: AZ56513
£40.40 (£33.67 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, 12x18x12, standard size, needle roller bearing used on cars with traffic clutch but may be used on virtually any 2cv.Spigot (pilot) bush for 2cv crankshaft, 12x18x12, standard size, needle roller bearing used on cars with traffic clutch but may be used on virtually any 2cv.
Spigot (pilot) bush for 2cv crankshaft, 12x18x12, standard size, needle roller bearing used on cars with traffic clutch but may be used on virtually any 2cv. Part Number: 7903090173
£9.35 (£7.79 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, 12x18x16, standard size, oil-impregnated sintered bronze bearing (which is like oilite).
Spigot (pilot) bush for 2cv crankshaft, 12x18x16, standard size, oil-impregnated sintered bronze bearing (which is like oilite). Part Number: 20103
£5.40 (£4.50 ex. VAT)
Spigot (pilot) bush for 2cv crankshaft, NON-STANDARD EXTERNAL OVERSIZE, 12x18.2x16 phosphor-bronze (calcar). SEE NOTES.
Spigot (pilot) bush for 2cv crankshaft, NON-STANDARD EXTERNAL OVERSIZE, 12x18.2x16 phosphor-bronze (calcar). SEE NOTES. Part Number: 75420102
£14.88 (£12.40 ex. VAT)
Split pin, 2.4mm x 18mm. Per 10
Split pin, 2.4mm x 18mm. Per 10 Part Number: 03107
£1.20 (£1.00 ex. VAT)
Split pin, 5mmx50mm (for driveshaft nut)
Split pin, 5mmx50mm (for driveshaft nut) Part Number: 03106
£0.25 (£0.21 ex. VAT)
Spring (wavy) washer on rocker shaft
Spring (wavy) washer on rocker shaft Part Number: 696311
£2.28 (£1.90 ex. VAT)
Spring for bonnet catch 2cv6, fits under steel catch, 36mm overall length.
Spring for bonnet catch 2cv6, fits under steel catch, 36mm overall length. Part Number: 5420639
£3.60 (£3.00 ex. VAT)
Spring for steering rack back slider push guide, 16.5 diam,23mm long,2.4mm wireSpring for steering rack back slider push guide, 16.5 diam,23mm long,2.4mm wire
Spring for steering rack back slider push guide, 16.5 diam,23mm long,2.4mm wire Part Number: A4424A
£8.40 (£7.00 ex. VAT)
Spring in headlight adjuster assembly, 2 on 2cv, price per one.
Spring in headlight adjuster assembly, 2 on 2cv, price per one. Part Number: AK54151
£3.24 (£2.70 ex. VAT)
Spring inside track rod end housing (one per side).
Spring inside track rod end housing (one per side). Part Number: 19952
£4.30 (£3.58 ex. VAT)
Spring on internal operating rod for door lock 2cv
Spring on internal operating rod for door lock 2cv Part Number: AZ861123
£1.80 (£1.50 ex. VAT)
Spring on push rod tubeSpring on push rod tube
Spring on push rod tube Part Number: 16419
£6.60 (£5.50 ex. VAT)
SPRING ONLY for front LEFT seat adjuster lever for 2cv, Dyane etc. (not Mehari)
SPRING ONLY for front LEFT seat adjuster lever for 2cv, Dyane etc. (not Mehari) Part Number: AM922271B
£9.13 (£7.61 ex. VAT)
Spring to tension hand brake cable, 2cv etc., disc brake type
Spring to tension hand brake cable, 2cv etc., disc brake type Part Number: 5420271
£6.00 (£5.00 ex. VAT)
Spring tube end cap, 2cv6 etc, modified type - unable to use original felt seal.
Spring tube end cap, 2cv6 etc, modified type - unable to use original felt seal. Part Number: 3496A
£27.60 (£23.00 ex. VAT)
Spring tube end cap, AK400, Acadiane etc.Spring tube end cap, AK400, Acadiane etc.
Spring tube end cap, AK400, Acadiane etc. Part Number: AK43496
£58.80 (£49.00 ex. VAT)
Spring tube end, stainless steel, end cap, 2cv6 etc
Spring tube end, stainless steel, end cap, 2cv6 etc Part Number: A1.8333
£33.60 (£28.00 ex. VAT)
Spring tube pot steel casing ONLY, 2cv6 etc. 110mm I.D., 460mm long.
Spring tube pot steel casing ONLY, 2cv6 etc. 110mm I.D., 460mm long. Part Number: 3499A
£38.40 (£32.00 ex. VAT)
Spring tube pot steel casing only, AK400, Acadiane, Ami, 135.80mm diam.
Spring tube pot steel casing only, AK400, Acadiane, Ami, 135.80mm diam. Part Number: 3499M
£37.08 (£30.90 ex. VAT)
Spring under external door handle 2cv
Spring under external door handle 2cv Part Number: AZ86134
£1.80 (£1.50 ex. VAT)
Spring, fits between rear shoe and backplate, around the locating pin.Spring, fits between rear shoe and backplate, around the locating pin.
Spring, fits between rear shoe and backplate, around the locating pin. Part Number: A45185
£3.00 (£2.50 ex. VAT)
Stainless nut to hold wiper spindle drive unit on outside of body. M16x1.00. See description notes.
Stainless nut to hold wiper spindle drive unit on outside of body. M16x1.00. See description notes. Part Number: AM56594
£3.12 (£2.60 ex. VAT)
Stainless steel backed suspension cylinder rubber bump stop (doughnut).
Stainless steel backed suspension cylinder rubber bump stop (doughnut). Part Number: 4351B_INOX
£16.80 (£14.00 ex. VAT)
Stainless steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).Stainless steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).
Stainless steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut). Part Number: A1.8348
£9.91 (£8.26 ex. VAT)
Stainless steel bodied number plate light for Mehari, Acadiane, Ami etcStainless steel bodied number plate light for Mehari, Acadiane, Ami etc
Stainless steel bodied number plate light for Mehari, Acadiane, Ami etc Part Number: 5400981
£33.92 (£28.27 ex. VAT)
Stainless steel indicator backplate spider for left front indicator.Stainless steel indicator backplate spider for left front indicator.
Stainless steel indicator backplate spider for left front indicator. Part Number: AZ575211A
£8.80 (£7.33 ex. VAT)
Stainless steel indicator backplate spider for right front indicator.Stainless steel indicator backplate spider for right front indicator.
Stainless steel indicator backplate spider for right front indicator. Part Number: AZ575212A
£8.80 (£7.33 ex. VAT)
Stainless steel over rider 2cv, order rubbers 61595A separately. See description notes.Stainless steel over rider 2cv, order rubbers 61595A separately. See description notes.
Stainless steel over rider 2cv, order rubbers 61595A separately. See description notes. Part Number: 1519SS
£29.50 (£24.58 ex. VAT)
Stainless steel support clamp around standard 32mm diam. 2cv6 exhaust tailpipe.
Stainless steel support clamp around standard 32mm diam. 2cv6 exhaust tailpipe. Part Number: 81951SS
£6.20 (£5.17 ex. VAT)
Stainless steel threaded tube inside each end of suspension tube. Needs 2 x 46mm lock nut also (not included)
Stainless steel threaded tube inside each end of suspension tube. Needs 2 x 46mm lock nut also (not included) Part Number: A1.8340
£32.68 (£27.23 ex. VAT)
Stainless steel trim along sill below doors, 2cv, clips included, the price is each (per one piece).
Stainless steel trim along sill below doors, 2cv, clips included, the price is each (per one piece). Part Number: 40749
£34.80 (£29.00 ex. VAT)
Stainless steel U - clamp 36mm, either end exhaust torpedo silencer
Stainless steel U - clamp 36mm, either end exhaust torpedo silencer Part Number: 15110S
£9.60 (£8.00 ex. VAT)
Stainless steel, unpolished, front bumper 2cv, please look at the illustrations before you buy!Stainless steel, unpolished, front bumper 2cv, please look at the illustrations before you buy!
Stainless steel, unpolished, front bumper 2cv, please look at the illustrations before you buy! Part Number: 18901SS
£102.00 (£85.00 ex. VAT)
Standard U - clamp exhaust, 36mm, either end torpedo silencer
Standard U - clamp exhaust, 36mm, either end torpedo silencer Part Number: U36
£3.12 (£2.60 ex. VAT)
Starter motor positive connector cover
Starter motor positive connector cover Part Number: 8520
£2.96 (£2.47 ex. VAT)
Starter pull cable ""D", early 2cv, Dyane or AZU, total length 125cmStarter pull cable ""D", early 2cv, Dyane or AZU, total length 125cm
Starter pull cable ""D", early 2cv, Dyane or AZU, total length 125cm Part Number: 10250020
£27.24 (£22.70 ex. VAT)
Starting cranking handle and wheel brace for 2cv6 only.
Starting cranking handle and wheel brace for 2cv6 only. Part Number: A2511A
£46.80 (£39.00 ex. VAT)
Starting, jack handle for Dyane, will not fit 2cv.
Starting, jack handle for Dyane, will not fit 2cv. Part Number: 1476
£44.75 (£37.29 ex. VAT)
Steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).Steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut).
Steel backing plate cap ONLY for 2cv suspension cylinder rubber bump stop (doughnut). Part Number: A4351B_CAP
£8.28 (£6.90 ex. VAT)
Steel cap for retaining felt seal, complete with seal for ORIGINAL only spring tube end cap 3496ASteel cap for retaining felt seal, complete with seal for ORIGINAL only spring tube end cap 3496A
Steel cap for retaining felt seal, complete with seal for ORIGINAL only spring tube end cap 3496A Part Number: 350019
£26.16 (£21.80 ex. VAT)
Steel cover for friction damper
Steel cover for friction damper Part Number: AZ43691
£23.95 (£19.96 ex. VAT)
Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies.Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies.
Steel cup to mount the double cardan type driveshaft gaiter used from early sixties to early seventies. Part Number: AM37389
£12.72 (£10.60 ex. VAT)
Steel dust cup washer for kingpin, 1mmx17.1mmx30mm internal, (included in our kingpin kit).
Steel dust cup washer for kingpin, 1mmx17.1mmx30mm internal, (included in our kingpin kit). Part Number: A4139
£2.28 (£1.90 ex. VAT)

Recently viewed