Filters

All products

2114 products

Showing 433 - 480 of 2114 products
Clip to locate heater cable end on some older (until 1977) heat exchangers and cable lever fittings Ami 8 etcClip to locate heater cable end on some older (until 1977) heat exchangers and cable lever fittings Ami 8 etc
Clip to locate heater cable end on some older (until 1977) heat exchangers and cable lever fittings Ami 8 etc Part Number: AM644103B
£2.50 (£2.08 ex. VAT)
Clip, each end of suspension knife edge pivot.
Clip, each end of suspension knife edge pivot. Part Number: 99649
£1.08 (£0.90 ex. VAT)
Clip, holds REAR of 2cv rear wing to body. New better quality part. One per wing, our price is for one clip.
Clip, holds REAR of 2cv rear wing to body. New better quality part. One per wing, our price is for one clip. Part Number: 9848U
£2.64 (£2.20 ex. VAT)
Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis.Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis.
Clip, plastic, to hold fuel and/or brake pipe to original and Ecas chassis. Part Number: 4221A
£2.16 (£1.80 ex. VAT)
Clutch cable 2cv6/Dy6 1970>, LEFT HAND DRIVE. Overall length = 69.5cm.
Clutch cable 2cv6/Dy6 1970>, LEFT HAND DRIVE. Overall length = 69.5cm. Part Number: 30115A
£15.60 (£13.00 ex. VAT)
Clutch cable 2cv6/Dy6 1970>1990, Right hand drive.(UK), overall length = 72cm. Adjuster nuts should be ordered separately if required.
Clutch cable 2cv6/Dy6 1970>1990, Right hand drive.(UK), overall length = 72cm. Adjuster nuts should be ordered separately if required. Part Number: 30116
£28.10 (£23.42 ex. VAT)
Clutch cable Ami 8, fits left hand drive or right hand drive Ami! Overall length = 64cm.
Clutch cable Ami 8, fits left hand drive or right hand drive Ami! Overall length = 64cm. Part Number: 30113
£13.56 (£11.30 ex. VAT)
Clutch cable, 2cv AZ, type with lever above gearbox, overall length 395mm
Clutch cable, 2cv AZ, type with lever above gearbox, overall length 395mm Part Number: 30114
£15.60 (£13.00 ex. VAT)
Clutch cover (mechanism) 2cv etc. diaphragm type.
Clutch cover (mechanism) 2cv etc. diaphragm type. Part Number: 265494
£59.00 (£49.17 ex. VAT)
Clutch cover plate mechanism only, 3 fingers with circular rider, 2cv etc up to 1969.
Clutch cover plate mechanism only, 3 fingers with circular rider, 2cv etc up to 1969. Part Number: 272980
£69.00 (£57.50 ex. VAT)
Clutch fork for 2cv with overhead clutch fork arm and carbon type bearing.
Clutch fork for 2cv with overhead clutch fork arm and carbon type bearing. Part Number: A3144C
£77.18 (£64.32 ex. VAT)
Clutch fork pivot locating screw.
Clutch fork pivot locating screw. Part Number: 07094
£1.42 (£1.18 ex. VAT)
Clutch fork pivot plastic bush.
Clutch fork pivot plastic bush. Part Number: 20178
£3.84 (£3.20 ex. VAT)
Clutch fork pivot shaft.
Clutch fork pivot shaft. Part Number: 27611
£7.25 (£6.04 ex. VAT)
Clutch friction plate 2cv etc. 03/1982 onward, 18 splines, diaphragm type. Compatible part.
Clutch friction plate 2cv etc. 03/1982 onward, 18 splines, diaphragm type. Compatible part. Part Number: 266354
£36.00 (£30.00 ex. VAT)
Clutch friction plate 2cv etc. 18 splines, coil spring type. Generally (not definitively) fits 1969 to March 1982.
Clutch friction plate 2cv etc. 18 splines, coil spring type. Generally (not definitively) fits 1969 to March 1982. Part Number: 264314
£36.00 (£30.00 ex. VAT)
Clutch friction plate, 10 splines, 1955 to 1966, for use WITH centrifugal clutch or standard clutch
Clutch friction plate, 10 splines, 1955 to 1966, for use WITH centrifugal clutch or standard clutch Part Number: 2300007
£36.00 (£30.00 ex. VAT)
Clutch friction plate, 8 splines, 1952 to 1955
Clutch friction plate, 8 splines, 1952 to 1955 Part Number: 2300005
£52.21 (£43.51 ex. VAT)
Clutch kit 2cv etc. from MARCH 1982 (diaphragm type), budget 18 splines diaphragm clutch kit made for Burton. NewClutch kit 2cv etc. from MARCH 1982 (diaphragm type), budget 18 splines diaphragm clutch kit made for Burton. New
Clutch kit 2cv etc. from MARCH 1982 (diaphragm type), budget 18 splines diaphragm clutch kit made for Burton. New Part Number: 545301
£68.14 (£56.78 ex. VAT)
Clutch kit 2cv etc. March 1970 to FEB. 1982, 18 splines (coil spring 'type'), SEE VERY IMPORTANT NOTES.Clutch kit 2cv etc. March 1970 to FEB. 1982, 18 splines (coil spring 'type'), SEE VERY IMPORTANT NOTES.
Clutch kit 2cv etc. March 1970 to FEB. 1982, 18 splines (coil spring 'type'), SEE VERY IMPORTANT NOTES. Part Number: 003396
£81.28 (£67.73 ex. VAT)
Clutch kit, 2cv etc., 10 splines, all 1955 to 1966
Clutch kit, 2cv etc., 10 splines, all 1955 to 1966 Part Number: 2300311
£115.00 (£95.83 ex. VAT)
Clutch kit, 2cv etc., 8 splines 1952 to 1955, A + AU 1st model.
Clutch kit, 2cv etc., 8 splines 1952 to 1955, A + AU 1st model. Part Number: 2300310
£115.00 (£95.83 ex. VAT)
Clutch operating fork, top quality, 2cv6, Dyane6 etc. See notes about poor quality items elsewhere on the market.Clutch operating fork, top quality, 2cv6, Dyane6 etc. See notes about poor quality items elsewhere on the market.
Clutch operating fork, top quality, 2cv6, Dyane6 etc. See notes about poor quality items elsewhere on the market. Part Number: AM3144C
£34.80 (£29.00 ex. VAT)
Clutch plate alignment, centralising tool and spigot bush removal tool.Clutch plate alignment, centralising tool and spigot bush removal tool.
Clutch plate alignment, centralising tool and spigot bush removal tool. Part Number: A1.2765
£22.80 (£19.00 ex. VAT)
Clutch release bearing 2cv etc. carbon conversion type up to 1968.Clutch release bearing 2cv etc. carbon conversion type up to 1968.
Clutch release bearing 2cv etc. carbon conversion type up to 1968. Part Number: 276707
£34.80 (£29.00 ex. VAT)
Clutch release bearing 2cv etc. coil spring type.
Clutch release bearing 2cv etc. coil spring type. Part Number: 275854
£22.08 (£18.40 ex. VAT)
Clutch release bearing 2cv etc. diaphragm type.
Clutch release bearing 2cv etc. diaphragm type. Part Number: 266402
£22.08 (£18.40 ex. VAT)
Clutch release bearing clip only for 2cv etc. coil spring type.
Clutch release bearing clip only for 2cv etc. coil spring type. Part Number: 95576819
£7.20 (£6.00 ex. VAT)
Combination tool, 1/2" drive, to remove 2CV wheel bearing lock ring or loosen rear 44mm hex. nut.Combination tool, 1/2" drive, to remove 2CV wheel bearing lock ring or loosen rear 44mm hex. nut.
Combination tool, 1/2" drive, to remove 2CV wheel bearing lock ring or loosen rear 44mm hex. nut. Part Number: A1.2702
£37.20 (£31.00 ex. VAT)
Complete brake set for rear of 2cv Dolly etc, shoes, LHM cylinders, caps, 44mm nuts, fitting kit, ready to fit.
Complete brake set for rear of 2cv Dolly etc, shoes, LHM cylinders, caps, 44mm nuts, fitting kit, ready to fit. Part Number: 05255KIT
£79.00 (£65.83 ex. VAT)
Complete headlamp unit, chromed plastic shell with H4 P45t fitting. RIGHT HAND DRIVEComplete headlamp unit, chromed plastic shell with H4 P45t fitting. RIGHT HAND DRIVE
Complete headlamp unit, chromed plastic shell with H4 P45t fitting. RIGHT HAND DRIVE Part Number: 1857009
£88.80 (£74.00 ex. VAT)
Complete headlamp unit, original VALEO, chromed plastic shell with LEFT HAND DRIVE H4 P43t fitting, SEE NOTES.
Complete headlamp unit, original VALEO, chromed plastic shell with LEFT HAND DRIVE H4 P43t fitting, SEE NOTES. Part Number: 82600
£178.80 (£149.00 ex. VAT)
Complete original style track rod adjuster kit, zinc & yellow treatmentComplete original style track rod adjuster kit, zinc & yellow treatment
Complete original style track rod adjuster kit, zinc & yellow treatment Part Number: AM44310AKIT
£26.40 (£22.00 ex. VAT)
Compression spring for idle mixture control for Solex 26/35 carburettorCompression spring for idle mixture control for Solex 26/35 carburettor
Compression spring for idle mixture control for Solex 26/35 carburettor Part Number: JPP06
£3.53 (£2.94 ex. VAT)
Conical, thick, bevelled washer between headlight fastening nut and mount on headlight bar,
Conical, thick, bevelled washer between headlight fastening nut and mount on headlight bar, Part Number: 5443127
£4.80 (£4.00 ex. VAT)
Connector set 3mm bullet, 10 pairs male gender, 10 female gender with rubber + colour sleeves.
Connector set 3mm bullet, 10 pairs male gender, 10 female gender with rubber + colour sleeves. Part Number: 2940540
£26.40 (£22.00 ex. VAT)
Connector set 4mm bullet, 10 pairs male gender, 10 female gender with rubber + colour sleeves.
Connector set 4mm bullet, 10 pairs male gender, 10 female gender with rubber + colour sleeves. Part Number: 2940541
£26.40 (£22.00 ex. VAT)
Connector, female, 3mm bullet, just like original Citroen. Per one piece
Connector, female, 3mm bullet, just like original Citroen. Per one piece Part Number: az5123
£0.84 (£0.70 ex. VAT)
Connector, female, 4mm bullet, just like original Citroen. Per one piece
Connector, female, 4mm bullet, just like original Citroen. Per one piece Part Number: 5420487
£0.88 (£0.73 ex. VAT)
Connector, male, 3mm bullet, just like original Citroen. Per one piece
Connector, male, 3mm bullet, just like original Citroen. Per one piece Part Number: az5124
£0.84 (£0.70 ex. VAT)
Connector, male, 4mm bullet, just like original Citroen. Per one piece
Connector, male, 4mm bullet, just like original Citroen. Per one piece Part Number: 5412276
£0.84 (£0.70 ex. VAT)
Contact breaker points only, 2cv etc. Suits Femsa or Ducellier system. 1970 onward.
Contact breaker points only, 2cv etc. Suits Femsa or Ducellier system. 1970 onward. Part Number: D301DG
£5.90 (£4.92 ex. VAT)
Contact breaker points only, 6 VOLT, 375cc, 425cc etc. Also 602cc M4 engine. (NOT Dolly)
Contact breaker points only, 6 VOLT, 375cc, 425cc etc. Also 602cc M4 engine. (NOT Dolly) Part Number: D305
£4.32 (£3.60 ex. VAT)
Contact breaker points with condenser, 2cv etc. 1970 onwardContact breaker points with condenser, 2cv etc. 1970 onward
Contact breaker points with condenser, 2cv etc. 1970 onward Part Number: 1400200
£7.70 (£6.42 ex. VAT)
Cooling shroud set brake disc 2CV Made by Burton.
Cooling shroud set brake disc 2CV Made by Burton. Part Number: A1.5885
£82.32 (£68.60 ex. VAT)
Copper grease anti seize paste, 20gm tube, helps nuts slip undone.
Copper grease anti seize paste, 20gm tube, helps nuts slip undone. Part Number: XCG020
£3.80 (£3.17 ex. VAT)
Copper sealing washer 7.1mmx10mmx1.0mm, used for cylinder head oil feed etc, pack of 10 washers.
Copper sealing washer 7.1mmx10mmx1.0mm, used for cylinder head oil feed etc, pack of 10 washers. Part Number: 133964
£4.08 (£3.40 ex. VAT)
Copper washer 10x18x1.0mm, used between banjo and wheel cylinder etc.
Copper washer 10x18x1.0mm, used between banjo and wheel cylinder etc. Part Number: BP37-A
£0.96 (£0.80 ex. VAT)

Recently viewed