Filters

Heating & ventilating

24 products

Showing 1 - 24 of 24 products
Clip to locate heater cable end on some older heat exchangers and cable lever fittings Ami 8 etc
Double heat exchanger cable clamp foot.
Double heat exchanger cable clamp foot. Part Number: AZU64497
£3.40 (£2.83 ex. VAT)
Heat dash distribution pull push operating rod 2cv.
Heat dash distribution pull push operating rod 2cv. Part Number: 96995271
£5.83 (£4.86 ex. VAT)
Heat exchanger box cable locating clip large
Heat exchanger box cable locating clip large Part Number: AM644103A
£4.50 (£3.75 ex. VAT)
Heat exchanger box cable locating clip small
Heat exchanger box cable locating clip small Part Number: AM644103
£4.50 (£3.75 ex. VAT)
Heated glass rear window for 2cv. OUT OF STOCK
Heated glass rear window for 2cv. OUT OF STOCK Part Number: 20255
£59.00 (£49.17 ex. VAT)
Heater cable clamp joint block with screws
Heater cable clamp joint block with screws Part Number: AZU644101
£7.20 (£6.00 ex. VAT)
Heater cable, between each heat exchanger.
Heater cable, between each heat exchanger. Part Number: 57785
£8.95 (£7.46 ex. VAT)
Heater cable, dash to left hand exchanger 2cv6. LEFT HAND DRIVE, does not fit UK market cars.
Heater control, STAINLESS STEEL, 2cv left hand drive, Dyane right hand drive.
Heater escape (dump) tube, for 2cv only, high quality rubber, heat exchanger through wing.
Heater escape (dump) tube, high quality rubber, for Ami 8, Dyane, Acadiane, heat exchanger to wing.
Heater escape (dump) tube, original cardboard, heat exchanger through wing.
Heater tube, 2cv, old felt type with wire approx. 520mm
Heater tube, 2cv, old felt type with wire approx. 520mm Part Number: 4391J
£11.08 (£9.23 ex. VAT)
Heater tube, 2cv, old felt type, curved, plastic shield, with wire approx. 80x55x400mm
Repair plate, set of 2, for spring mounting point on heat exchangers.
Repair plate, set of 2, for spring mounting point on heat exchangers. Part Number: 211009
£5.36 (£4.47 ex. VAT)
Rubber gaiter in wing for escape tube duct
Rubber gaiter in wing for escape tube duct Part Number: 43155
£6.02 (£5.02 ex. VAT)
Set of 4 heater tubes for 2cv6 right hand drive (UK model)
Set of 4 heater tubes for 2cv6 right hand drive (UK model) Part Number: 99292
£32.00 (£26.67 ex. VAT)
Single heat exchanger cable clamp foot.
Single heat exchanger cable clamp foot. Part Number: 585698
£3.40 (£2.83 ex. VAT)
Tube to screen demister right hand for right hand drive (UK) 2cv, 1977 onward.
Tube to screen demister right hand, 67cm long, for OLD Right Hand Drive (UK) 2cv up to 1977 ONLY.
Tube to screen heater demister left hand side of all 2cv4/2cv6. See notes
Worm drive clip, jubilee style, 70mm to 90mm, to fasten heat escape dump tube to exchanger.

Recently viewed